Studies on Treatment of Dyeing Wastewater with Polysilic Aluminium Ferric Flocculants
Yuman Lin
Abstract
Yuman Lin
Abstract
The polysilic aluminium ferric flocculants were prepared from bauxite sludge.Its flocculating effects were studied.The flocculating test of anthraquinone disperse yellow solution of pH 6~10 resulted in about 90% reduction for color by 1.0 mL/L flocculants of n(Al)∶n(Fe)=1.0,n(M)∶n(SiO_2)=1.0.The flocculants were applied to treat industrial dyeing wastewater,and results showed that the color removal rate was about 90% when the flocculants of n(Al)∶n(Fe)=1.0~3.0,n(M)∶n(SiO_2)=1.0 by 2.0 mL/L were used.These flocculants were much better than PAC in removal rate of COD_(Cr) when treating dyeing wastewater.In addition,the flocculating mechanism was also discussed.
OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
The polysilic aluminium ferric flocculants were prepared from bauxite sludge.Its flocculating effects were studied.The flocculating test of anthraquinone disperse yellow solution of pH 6~10 resulted in about 90% reduction for color by 1.0 mL/L flocculants of n(Al)∶n(Fe)=1.0,n(M)∶n(SiO_2)=1.0.The flocculants were applied to treat industrial dyeing wastewater,and results showed that the color removal rate was about 90% when the flocculants of n(Al)∶n(Fe)=1.0~3.0,n(M)∶n(SiO_2)=1.0 by 2.0 mL/L were used.These flocculants were much better than PAC in removal rate of COD_(Cr) when treating dyeing wastewater.In addition,the flocculating mechanism was also discussed.
Key concepts: Flocculation, Ferric, Aluminium, Pulp and paper industry, Nuclear chemistry, Wastewater, Chemistry, Dyeing