Hydrogenation of Silicon Tetrachloride in the Presence of Silicon: Thermodynamic and Experimental Investigation
Weijie Ding, Jian-Min Yan, Wen‐De Xiao
Abstract
Weijie Ding, Jian-Min Yan, Wen‐De Xiao
Abstract
Hydrogenation of silicon tetrachloride (STC) in the presence of silicon was investigated both thermodynamically and experimentally. The thermodynamic results revealed that the reaction is thermodynamically constrained and the STC equilibrium conversion is nearly temperature-independent but increases with increasing pressure and H 2 /STC feed ratio. Trichlorosilane (TCS) was calculated to be the dominant product, with trace amounts of dichlorosilane (DCS) and HCl as feasible byproducts. Experimental tests were conducted in a fixed-bed reactor loaded with silicon. The results indicated that the reaction is kinetically restricted in the absence of a catalyst. Adding CuCl to the silicon mass bed was found to result in a dramatic increase in the STC conversion, and Cu 3 Si was determined to be the active species. In all of the tests runs, TCS was determined to be the dominant product, and the STC reaction rate was found to increase markedly as the temperature and STC partial pressure increased but not to depend on the silicon particle size.
OpenAlex reports 45 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Hydrogenation of silicon tetrachloride (STC) in the presence of silicon was investigated both thermodynamically and experimentally. The thermodynamic results revealed that the reaction is thermodynamically constrained and the STC equilibrium conversion is nearly temperature-independent but increases with increasing pressure and H 2 /STC feed ratio. Trichlorosilane (TCS) was calculated to be the dominant product, with trace amounts of dichlorosilane (DCS) and HCl as feasible byproducts. Experimental tests were conducted in a fixed-bed reactor loaded with silicon. The results indicated that the reaction is kinetically restricted in the absence of a catalyst. Adding CuCl to the silicon mass bed was found to result in a dramatic increase in the STC conversion, and Cu 3 Si was determined to be the active species. In all of the tests runs, TCS was determined to be the dominant product, and the STC reaction rate was found to increase markedly as the temperature and STC partial pressure increased but not to depend on the silicon particle size.
Key concepts: Silicon tetrachloride, Trichlorosilane, Silicon, Dichlorosilane, Chemistry, Catalysis, Chemical engineering, Analytical Chemistry (journal)