2003Journal of Vacuum Science & Technology A Vacuum Surfaces and FilmsRequires access

Plasma-enhanced chemical vapor deposition of low-kdielectric films using methylsilane, dimethylsilane, and trimethylsilane precursors

Qingguo Wu, Karen K. Gleason

Open publisher page 57 citations

Abstract

Pulsed plasma-enhanced chemical vapor deposition from mixtures containing methylsilane (1MS), dimethylsilane (2MS), or trimethylsilane (3MS), systematically varied the methyl content in the resulting low dielectric constant films. The refractive index was found to depend strongly on methyl content but was relatively independent of the precursor used. However, the precursor used strongly impacted the local bonding structure of these organosilicate glass materials as revealed by Si29 nuclear magnetic resonance. The variations in local bonding structure did impact film hardness. No significant changes were found for the concentrations of CH3 and Si–CH3 after annealing and relative humidity treatment for all Si:O:C:H films grown from 1MS, 2MS and 3MS, which suggests that Si:O:C:H films have high thermal stability and very low moisture uptake. The dielectric constants of 2.4–2.6 were observed after annealing.

About this research paper

What this paper is about

Pulsed plasma-enhanced chemical vapor deposition from mixtures containing methylsilane (1MS), dimethylsilane (2MS), or trimethylsilane (3MS), systematically varied the methyl content in the resulting low dielectric constant films. The refractive index was found to depend strongly on methyl content but was relatively independent of the precursor used. However, the precursor used strongly impacted the local bonding structure of these organosilicate glass materials as revealed by Si29 nuclear magnetic resonance. The variations in local bonding structure did impact film hardness. No significant changes were found for the concentrations of CH3 and Si–CH3 after annealing and relative humidity treatment for all Si:O:C:H films grown from 1MS, 2MS and 3MS, which suggests that Si:O:C:H films have high thermal stability and very low moisture uptake. The dielectric constants of 2.4–2.6 were observed after annealing.

Why it matters

OpenAlex reports 57 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Pulsed plasma-enhanced chemical vapor deposition from mixtures containing methylsilane (1MS), dimethylsilane (2MS), or trimethylsilane (3MS), systematically varied the methyl content in the resulting low dielectric constant films. The refractive index was found to depend strongly on methyl content but was relatively independent of the precursor used. However, the precursor used strongly impacted the local bonding structure of these organosilicate glass materials as revealed by Si29 nuclear magnetic resonance. The variations in local bonding structure did impact film hardness. No significant changes were found for the concentrations of CH3 and Si–CH3 after annealing and relative humidity treatment for all Si:O:C:H films grown from 1MS, 2MS and 3MS, which suggests that Si:O:C:H films have high thermal stability and very low moisture uptake. The dielectric constants of 2.4–2.6 were observed after annealing.

Key concepts: Trimethylsilane, Dimethylsilane, Dielectric, Annealing (glass), Chemical vapor deposition, Analytical Chemistry (journal), Thermal stability, Materials science

Related papers

Back to paper searchBrowse research topicsOriginal source
Plasma-enhanced chemical vapor deposition of low-kdielectric films using methylsilane, dimethylsilane, and trimethylsilane precursors — Research Paper | ScholarLens