2023ProcessesOpen access

Feasibility of Advanced CO2 Injection and Well Pattern Adjustment to Improve Oil Recovery and CO2 Storage in Tight-Oil Reservoirs

Lijun Zhang, Tianwei Sun, Xiaobing Han, Jianchao Shi, Jiusong Zhang, Huiting Tang, Haiyang Yu

Open full text 16 citations

Abstract

Global tight-oil reserves are abundant, but the depletion development of numerous tight-oil reservoirs remains unsatisfactory. CO2 injection development represents a significant method of reservoir production, potentially facilitating enhanced oil recovery (EOR) alongside CO2 storage. Currently, limited research exists on advanced CO2 injection and well pattern adjustment aimed at improving the oil recovery and CO2 storage within tight-oil reservoirs. This paper focuses on the examination of tight oil within the Ordos Basin. Through the employment of slim-tube experiments, long-core displacement experiments, and reservoir numerical simulations, the near-miscible pressure range and minimum miscible pressure (MMP) for the target block were ascertained. The viability of EOR and CO2 sequestration via advanced CO2 injection was elucidated, establishing well pattern adjustment methodologies to ameliorate CO2 storage and enhance oil recovery. Simultaneously, the impacts of the injection volume and bottom-hole pressure on the development of advanced CO2 injection were explored in further detail. The experimental results indicate that the near-miscible pressure range of the CO2–crude oil in the study area is from 15.33 to 18.47 MPa, with an MMP of 18.47 MPa, achievable under reservoir pressure conditions. Compared to continuous CO2 injection, advanced CO2 injection can more effectively facilitate EOR and achieve CO2 sequestration, with the recovery and CO2 sequestration rates increasing by 4.83% and 2.29%, respectively. Through numerical simulation, the optimal injection volume for advanced CO2 injection was determined to be 0.04 PV, and the most favorable bottom-hole flowing pressure was identified as 10 MPa. By transitioning from a square well pattern to either a five-point well pattern or a row well pattern, the CO2 storage ratio significantly improved, and the gas–oil ratio of the production wells also decreased. Well pattern adjustment effectively supplements the formation energy, extends the stable production lives of production wells, and increases both the sweep efficiency and oil recovery. This study provides theoretical support and serves as a reference for CO2 injection development in tight-oil reservoirs.

Open-access reader

About this research paper

What this paper is about

Global tight-oil reserves are abundant, but the depletion development of numerous tight-oil reservoirs remains unsatisfactory. CO2 injection development represents a significant method of reservoir production, potentially facilitating enhanced oil recovery (EOR) alongside CO2 storage. Currently, limited research exists on advanced CO2 injection and well pattern adjustment aimed at improving the oil recovery and CO2 storage within tight-oil reservoirs. This paper focuses on the examination of tight oil within the Ordos Basin. Through the employment of slim-tube experiments, long-core displacement experiments, and reservoir numerical simulations, the near-miscible pressure range and minimum miscible pressure (MMP) for the target block were ascertained. The viability of EOR and CO2 sequestration via advanced CO2 injection was elucidated, establishing well pattern adjustment methodologies to ameliorate CO2 storage and enhance oil recovery. Simultaneously, the impacts of the injection volume and bottom-hole pressure on the development of advanced CO2 injection were explored in further detail. The experimental results indicate that the near-miscible pressure range of the CO2–crude oil in the study area is from 15.33 to 18.47 MPa, with an MMP of 18.47 MPa, achievable under reservoir pressure conditions. Compared to continuous CO2 injection, advanced CO2 injection can more effectively facilitate EOR and achieve CO2 sequestration, with the recovery and CO2 sequestration rates increasing by 4.83% and 2.29%, respectively. Through numerical simulation, the optimal injection volume for advanced CO2 injection was determined to be 0.04 PV, and the most favorable bottom-hole flowing pressure was identified as 10 MPa. By transitioning from a square well pattern to either a five-point well pattern or a row well pattern, the CO2 storage ratio significantly improved, and the gas–oil ratio of the production wells also decreased. Well pattern adjustment effectively supplements the formation energy, extends the stable production lives of production wells, and increases both the sweep efficiency and oil recovery. This study provides theoretical support and serves as a reference for CO2 injection development in tight-oil reservoirs.

Why it matters

OpenAlex reports 16 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Global tight-oil reserves are abundant, but the depletion development of numerous tight-oil reservoirs remains unsatisfactory. CO2 injection development represents a significant method of reservoir production, potentially facilitating enhanced oil recovery (EOR) alongside CO2 storage. Currently, limited research exists on advanced CO2 injection and well pattern adjustment aimed at improving the oil recovery and CO2 storage within tight-oil reservoirs. This paper focuses on the examination of tight oil within the Ordos Basin. Through the employment of slim-tube experiments, long-core displacement experiments, and reservoir numerical simulations, the near-miscible pressure range and minimum miscible pressure (MMP) for the target block were ascertained. The viability of EOR and CO2 sequestration via advanced CO2 injection was elucidated, establishing well pattern adjustment methodologies to ameliorate CO2 storage and enhance oil recovery. Simultaneously, the impacts of the injection volume and bottom-hole pressure on the development of advanced CO2 injection were explored in further detail. The experimental results indicate that the near-miscible pressure range of the CO2–crude oil in the study area is from 15.33 to 18.47 MPa, with an MMP of 18.47 MPa, achievable under reservoir pressure conditions. Compared to continuous CO2 injection, advanced CO2 injection can more effectively facilitate EOR and achieve CO2 sequestration, with the recovery and CO2 sequestration rates increasing by 4.83% and 2.29%, respectively. Through numerical simulation, the optimal injection volume for advanced CO2 injection was determined to be 0.04 PV, and the most favorable bottom-hole flowing pressure was identified as 10 MPa. By transitioning from a square well pattern to either a five-point well pattern or a row well pattern, the CO2 storage ratio significantly improved, and the gas–oil ratio of the production wells also decreased. Well pattern adjustment effectively supplements the formation energy, extends the stable production lives of production wells, and increases both the sweep efficiency and oil recovery. This study provides theoretical support and serves as a reference for CO2 injection development in tight-oil reservoirs.

Key concepts: Petroleum engineering, Enhanced oil recovery, Tight oil, Carbon sequestration, Injection well, Environmental science, Oil production, Volume (thermodynamics)

Related papers

Back to paper searchBrowse research topicsOriginal source
Feasibility of Advanced CO2 Injection and Well Pattern Adjustment to Improve Oil Recovery and CO2 Storage in Tight-Oil Reservoirs — Research Paper | ScholarLens