2023Applied Physics LettersRequires access

An efficient MSM UV photodetector with an ultra-low dark current enhanced by a back to back TiO2/PbTiO3 PN heterojunction

Yupeng Zhang, Ruiheng Zhou, Shengping Ruan, Yan Ma, Caixia Liu, Yu Chen, Jingran Zhou

Open publisher page 10 citations

Abstract

A TiO2 MSM UV photodetector has been extensively researched and exhibits many good properties such as stability and a large ratio of light to dark current. However, it suffers from a high dark current and slow response and recovery. In this work, an MSM UV photodetector based on a TiO2/PbTiO3 heterojunction was fabricated by a sol-gel method. Spontaneous polarization of ferroelectric perovskite PbTiO3 can deplete carriers and accelerate the separation and transport of photo-generated carriers. The photodetector showed enhanced performances, including an ultra-low dark current (1.146 19 × 10−11 A), an improving ratio of light to dark current, as well as short response and recovery times (decreasing to 65 and 81 ms). These results indicate the potential in the combination of ferroelectric perovskite PbTiO3 with traditional wide bandgap semiconductor materials to fabricate high-performance UV photodetectors.

About this research paper

What this paper is about

A TiO2 MSM UV photodetector has been extensively researched and exhibits many good properties such as stability and a large ratio of light to dark current. However, it suffers from a high dark current and slow response and recovery. In this work, an MSM UV photodetector based on a TiO2/PbTiO3 heterojunction was fabricated by a sol-gel method. Spontaneous polarization of ferroelectric perovskite PbTiO3 can deplete carriers and accelerate the separation and transport of photo-generated carriers. The photodetector showed enhanced performances, including an ultra-low dark current (1.146 19 × 10−11 A), an improving ratio of light to dark current, as well as short response and recovery times (decreasing to 65 and 81 ms). These results indicate the potential in the combination of ferroelectric perovskite PbTiO3 with traditional wide bandgap semiconductor materials to fabricate high-performance UV photodetectors.

Why it matters

OpenAlex reports 10 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

A TiO2 MSM UV photodetector has been extensively researched and exhibits many good properties such as stability and a large ratio of light to dark current. However, it suffers from a high dark current and slow response and recovery. In this work, an MSM UV photodetector based on a TiO2/PbTiO3 heterojunction was fabricated by a sol-gel method. Spontaneous polarization of ferroelectric perovskite PbTiO3 can deplete carriers and accelerate the separation and transport of photo-generated carriers. The photodetector showed enhanced performances, including an ultra-low dark current (1.146 19 × 10−11 A), an improving ratio of light to dark current, as well as short response and recovery times (decreasing to 65 and 81 ms). These results indicate the potential in the combination of ferroelectric perovskite PbTiO3 with traditional wide bandgap semiconductor materials to fabricate high-performance UV photodetectors.

Key concepts: Photodetector, Dark current, Materials science, Optoelectronics, Heterojunction, Ferroelectricity, Perovskite (structure), Band gap

Related papers

Back to paper searchBrowse research topicsOriginal source
An efficient MSM UV photodetector with an ultra-low dark current enhanced by a back to back TiO2/PbTiO3 PN heterojunction — Research Paper | ScholarLens