2023International Journal of Engineering Applied Sciences and TechnologyOpen access

2.4 G HZ MINIATURISED RECTANGULAR MPA WITH DEFECTED GROUND AND PATCH

H N Ravikiran, J. Jayanth, Naziya Farheen H S, G. H. Yogeesh

Open full text 2 citations

Abstract

This study aimed to develop a miniaturised rectangular microstrip patch antenna with a resonance frequency of 2.4 GHz. In order to achieve this, an initial microstrip antenna's resonance frequency was shifted from 3 GHz to a lower frequency by employing a defective ground structure (DGS) with a triangular-shaped slot into the ground plane. Also Triangular ring slots used defect the patch to improve co- and cross-polarization separation. Finally, a successful downsizing of up to 28% along the length and 18% along the width of the patch is achieved compared to the traditional 2.4 GHz microstrip antenna. The findings of the experiments have been obtained using high-frequency structure simulator software (HFSS). The substrate used in this work is RT/ Duroid 5880, which has a dielectric constant of 2.2 and a thickness of 1.575 mm.

Open-access reader

About this research paper

What this paper is about

This study aimed to develop a miniaturised rectangular microstrip patch antenna with a resonance frequency of 2.4 GHz. In order to achieve this, an initial microstrip antenna's resonance frequency was shifted from 3 GHz to a lower frequency by employing a defective ground structure (DGS) with a triangular-shaped slot into the ground plane. Also Triangular ring slots used defect the patch to improve co- and cross-polarization separation. Finally, a successful downsizing of up to 28% along the length and 18% along the width of the patch is achieved compared to the traditional 2.4 GHz microstrip antenna. The findings of the experiments have been obtained using high-frequency structure simulator software (HFSS). The substrate used in this work is RT/ Duroid 5880, which has a dielectric constant of 2.2 and a thickness of 1.575 mm.

Why it matters

OpenAlex reports 2 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

This study aimed to develop a miniaturised rectangular microstrip patch antenna with a resonance frequency of 2.4 GHz. In order to achieve this, an initial microstrip antenna's resonance frequency was shifted from 3 GHz to a lower frequency by employing a defective ground structure (DGS) with a triangular-shaped slot into the ground plane. Also Triangular ring slots used defect the patch to improve co- and cross-polarization separation. Finally, a successful downsizing of up to 28% along the length and 18% along the width of the patch is achieved compared to the traditional 2.4 GHz microstrip antenna. The findings of the experiments have been obtained using high-frequency structure simulator software (HFSS). The substrate used in this work is RT/ Duroid 5880, which has a dielectric constant of 2.2 and a thickness of 1.575 mm.

Key concepts: HFSS, Ground plane, Patch antenna, Microstrip antenna, Microstrip, Materials science, Dielectric, Resonance (particle physics)

Related papers

Back to paper searchBrowse research topicsOriginal source
2.4 G HZ MINIATURISED RECTANGULAR MPA WITH DEFECTED GROUND AND PATCH — Research Paper | ScholarLens