Experimental study on the effect of Cordia africana’s and Austria pine’s wood species on the performance of wood plastic composite

With its market demand expansion and increased application areas, products of wood-plastic composite (WPC) have been developing and growing rapidly in many countries over the last decades. This paper attempts to investigate the effect of wood species that are waste from the furniture industries on the performance of wood-plastic composites (WPCs). The samples were prepared by varying the wood flour species at 30wt% mixed with 70wt% HDPE (High Density polyethylene). The wood species used for samples preparation are Cordia africana’s /wanza/ wood flour, Austria pine’s wood flour, and the mixture of both wood species flour in 15wt% of each wood species and the resulted composites tensile and impact properties determined. Morphological and water absorption characteristics of these composites were also determined. The composite from the mixture of wood species exhibited best interfacial bonding between matrix and reinforcement that resulted in providing the best water absorption property, and the maximum tensile strength of the composite which is, 15.465 MPa. Compared with the pure HDPE, the reduction of impact strength with the addition of wood was also observed. Wood species in wood-plastic composites are an essential factor for the performance of WPCs.