Effect of aggregate gradation on rutting of asphalt concrete by using a wheel tracking device in Vietnam
Long Nguyen Hoàng, Thanh-Hai Le
Abstract
Open-access reader
Long Nguyen Hoàng, Thanh-Hai Le
Abstract
Open-access reader
Abstract This paper presents the relationship between rutting and aggregate gradation of asphalt concrete using a wheel tracking device at 60°C, with 30,000 cycles in air. The experiment was carried out on hot mix asphalt samples using three aggregate gradations which included maximum aggregate sizes of 9.5 mm, 12.5 mm and 19 mm. The result of the experiment showed that the maximum aggregate size has a great influence on the rutting of asphalt concrete.
OpenAlex reports 6 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Abstract This paper presents the relationship between rutting and aggregate gradation of asphalt concrete using a wheel tracking device at 60°C, with 30,000 cycles in air. The experiment was carried out on hot mix asphalt samples using three aggregate gradations which included maximum aggregate sizes of 9.5 mm, 12.5 mm and 19 mm. The result of the experiment showed that the maximum aggregate size has a great influence on the rutting of asphalt concrete.
Key concepts: Gradation, Rut, Aggregate (composite), Asphalt, Asphalt concrete, Asphalt pavement, Materials science, Composite material