Front-end of a non-invasive wireless real-time brain imaging system based on near-infrared spectroreflectometry
F. Normandin, Mohamad Sawan, Jocelyn Faubert
Abstract
F. Normandin, Mohamad Sawan, Jocelyn Faubert
Abstract
In this paper, we present a fully integrated front-end of a portable spectroreflectometry-based brain imaging system dedicated for acquisition of modulated optical signals at a frequency of 50 kHz. The proposed front-end preamplifier is composed of a photodetector, a transimpedance preamplifier, a two-stage voltage amplifier and a mixer. Strict constraints regarding noise thus have to be considered. The preamplifier consists of a transimpedance block featuring a 95 dB/spl Omega/ gain and an average input current noise density at the frequency of interest of approximately 1 pA//spl radic/Hz . Each of the two subsequent voltage amplifiers allows the user to obtain an additional 25 dB gain, which makes it possible to obtain a considerable total gain. Considering the tuning capabilities and the losses due to the filters and the non-ideal buffers, the proposed front-end allows us to obtain a total gain up to 165 dB. The back-end of the amplification chain, is composed of a mixer which is used to produce a continuous voltage proportional to the amplitude of the input optical signals. All those features were integrated using CMOS 0.18 /spl mu/m technology.
OpenAlex reports 2 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
In this paper, we present a fully integrated front-end of a portable spectroreflectometry-based brain imaging system dedicated for acquisition of modulated optical signals at a frequency of 50 kHz. The proposed front-end preamplifier is composed of a photodetector, a transimpedance preamplifier, a two-stage voltage amplifier and a mixer. Strict constraints regarding noise thus have to be considered. The preamplifier consists of a transimpedance block featuring a 95 dB/spl Omega/ gain and an average input current noise density at the frequency of interest of approximately 1 pA//spl radic/Hz . Each of the two subsequent voltage amplifiers allows the user to obtain an additional 25 dB gain, which makes it possible to obtain a considerable total gain. Considering the tuning capabilities and the losses due to the filters and the non-ideal buffers, the proposed front-end allows us to obtain a total gain up to 165 dB. The back-end of the amplification chain, is composed of a mixer which is used to produce a continuous voltage proportional to the amplitude of the input optical signals. All those features were integrated using CMOS 0.18 /spl mu/m technology.
Key concepts: Transimpedance amplifier, Preamplifier, Amplifier, Front and back ends, Physics, Automatic gain control, CMOS, Operational amplifier