ScholarLens Back to search
1970•Coastal Engineering 1970Requires access

The Influence of Breaker Type on Riprap Stability

John P. Ahrens

Open publisher page 6 citations

Abstract

Test data related to the stability of dumped quarry stone riprap under wave action is presented The tests were conducted in the large 635-foot wave tank at the Coastal Engineering Research Center at near prototype scale The data indicate that the stability of the riprap is strongly influenced by the type of breaker The lowest riprap stability is associated with a breaker type intermediate between plunging and surging, sometimes referred to as a collapsing breaker

About this research paper

What this paper is about

Test data related to the stability of dumped quarry stone riprap under wave action is presented The tests were conducted in the large 635-foot wave tank at the Coastal Engineering Research Center at near prototype scale The data indicate that the stability of the riprap is strongly influenced by the type of breaker The lowest riprap stability is associated with a breaker type intermediate between plunging and surging, sometimes referred to as a collapsing breaker

Why it matters

OpenAlex reports 6 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Test data related to the stability of dumped quarry stone riprap under wave action is presented The tests were conducted in the large 635-foot wave tank at the Coastal Engineering Research Center at near prototype scale The data indicate that the stability of the riprap is strongly influenced by the type of breaker The lowest riprap stability is associated with a breaker type intermediate between plunging and surging, sometimes referred to as a collapsing breaker

Key concepts: Riprap, Circuit breaker, Ballooning, Stability (learning theory), Geology, Geotechnical engineering, Marine engineering, Engineering

Related papers

Related paper 1Related paper 2Related paper 3
Back to paper searchBrowse research topicsOriginal source
The Influence of Breaker Type on Riprap Stability — Research Paper | ScholarLens