2011•Electroplating & Pollution ControlRequires access

An Experimental Study of Removing Sulfur Dioxide and Nitrogen Oxides by Stabilized Chlorine Dioxide

Song Xiang-dan

Open publisher page 0 citations

Abstract

In the experiment,stabilized chlorine dioxide solution was used as absorbent and gas-liquid countercurrent was adopted in operation.The effects of packing height,mass concentration of chlorine dioxide solution and solution pH value,etc.on the efficiency of removal rate of sulfur dioxide and nitrogen oxides by stabilized chlorine dioxide were investigated.The results show that the mass concentration of chlorine dioxide has the greatest impact on the removal rate and the pH value is of less influence on the removal rate.The removal rate can reach a higher level under both acidic and alkaline conditions.When the packing height is greater than 20 cm,chlorine dioxide concentration is 0.6 g/L,pH is 3.47,the removal rates of NOx and SO2 can reach 90 % and 99.95 % respectively.

About this research paper

What this paper is about

In the experiment,stabilized chlorine dioxide solution was used as absorbent and gas-liquid countercurrent was adopted in operation.The effects of packing height,mass concentration of chlorine dioxide solution and solution pH value,etc.on the efficiency of removal rate of sulfur dioxide and nitrogen oxides by stabilized chlorine dioxide were investigated.The results show that the mass concentration of chlorine dioxide has the greatest impact on the removal rate and the pH value is of less influence on the removal rate.The removal rate can reach a higher level under both acidic and alkaline conditions.When the packing height is greater than 20 cm,chlorine dioxide concentration is 0.6 g/L,pH is 3.47,the removal rates of NOx and SO2 can reach 90 % and 99.95 % respectively.

Why it matters

A significance statement is not available in the OpenAlex record.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

In the experiment,stabilized chlorine dioxide solution was used as absorbent and gas-liquid countercurrent was adopted in operation.The effects of packing height,mass concentration of chlorine dioxide solution and solution pH value,etc.on the efficiency of removal rate of sulfur dioxide and nitrogen oxides by stabilized chlorine dioxide were investigated.The results show that the mass concentration of chlorine dioxide has the greatest impact on the removal rate and the pH value is of less influence on the removal rate.The removal rate can reach a higher level under both acidic and alkaline conditions.When the packing height is greater than 20 cm,chlorine dioxide concentration is 0.6 g/L,pH is 3.47,the removal rates of NOx and SO2 can reach 90 % and 99.95 % respectively.

Key concepts: Chlorine dioxide, Sulfur dioxide, Nitrogen dioxide, Inorganic chemistry, Chemistry, Nitrogen, Chlorine, Organic chemistry

Related papers

Back to paper searchBrowse research topicsOriginal source
An Experimental Study of Removing Sulfur Dioxide and Nitrogen Oxides by Stabilized Chlorine Dioxide — Research Paper | ScholarLens