2012•Materials for Mechanical EngineeringRequires access

Preparation of Stainless Powder Slurry through Gelcasting of Gelatin and Properties of Green Body

Zhao Xi-peng, Kaiyong Jiang, Wang Fei

Open publisher page 0 citations

Abstract

The slurry was prepared by using 316L stainless steel powders as raw material,sodium alginate as dispersant and gelatin as agglomerant,the effects of solid content,dispersant content and agglomerant content on fluidity of the slurry and bending strength of the gelcasted green body were studied.Results show that the viscosity of slurry was smaller than 1 000 MPa ? s when pH value of slurry was 7,solid content ratio was 56 vol%, dispersant ratio was 1.0 wt%,agglomerant ratio was 0.8 wt%,and the bending strength of the green body prepared according to above parameters could reach 3.6 MPa after being dried at room temperature.

About this research paper

What this paper is about

The slurry was prepared by using 316L stainless steel powders as raw material,sodium alginate as dispersant and gelatin as agglomerant,the effects of solid content,dispersant content and agglomerant content on fluidity of the slurry and bending strength of the gelcasted green body were studied.Results show that the viscosity of slurry was smaller than 1 000 MPa ? s when pH value of slurry was 7,solid content ratio was 56 vol%, dispersant ratio was 1.0 wt%,agglomerant ratio was 0.8 wt%,and the bending strength of the green body prepared according to above parameters could reach 3.6 MPa after being dried at room temperature.

Why it matters

A significance statement is not available in the OpenAlex record.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The slurry was prepared by using 316L stainless steel powders as raw material,sodium alginate as dispersant and gelatin as agglomerant,the effects of solid content,dispersant content and agglomerant content on fluidity of the slurry and bending strength of the gelcasted green body were studied.Results show that the viscosity of slurry was smaller than 1 000 MPa ? s when pH value of slurry was 7,solid content ratio was 56 vol%, dispersant ratio was 1.0 wt%,agglomerant ratio was 0.8 wt%,and the bending strength of the green body prepared according to above parameters could reach 3.6 MPa after being dried at room temperature.

Key concepts: Dispersant, Slurry, Materials science, Green body, Gelatin, Raw material, Composite material, Flexural strength

Related papers

Back to paper searchBrowse research topicsOriginal source
Preparation of Stainless Powder Slurry through Gelcasting of Gelatin and Properties of Green Body — Research Paper | ScholarLens