Determination of Fluorene Derivatives 2-Bromofluorenone by High Performance Liquid Chromatography
Rui Zhao
Abstract
Rui Zhao
Abstract
2-Bromofluorenone was determined by high performance liquid chromatography with the chromatographic conditions of dalian Elite Hypersil ODS2 C18 column(4.6×250mm);the mobile phase of methanol-water(85∶15 V/V);the flow rate was 1.0mL/min;the detection wavelength was 254nm and column at 40℃.A good liner relationship was obtained within the range of 1.0—10.0mg/L of 2-bromofluorenone(r=0.9992);the average recovery rate was 99.22% and the RSD was lower than 1%.It was shown that the established method was rapid and reliable,providing an analysis method for the industrial preparation of 2-bromofluorenone.
OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
2-Bromofluorenone was determined by high performance liquid chromatography with the chromatographic conditions of dalian Elite Hypersil ODS2 C18 column(4.6×250mm);the mobile phase of methanol-water(85∶15 V/V);the flow rate was 1.0mL/min;the detection wavelength was 254nm and column at 40℃.A good liner relationship was obtained within the range of 1.0—10.0mg/L of 2-bromofluorenone(r=0.9992);the average recovery rate was 99.22% and the RSD was lower than 1%.It was shown that the established method was rapid and reliable,providing an analysis method for the industrial preparation of 2-bromofluorenone.
Key concepts: Chromatography, Fluorene, High-performance liquid chromatography, Chemistry, Methanol, Volumetric flow rate, Phase (matter), Analytical Chemistry (journal)