Pretreatment of Aniline-containing Wastewater with Catalytic Oxidation Method
Tianyi Ma
Abstract
Tianyi Ma
Abstract
Anilinecontaining dye wastewater was treated with Fenton's reagent oxidation method. Some factors which influence the removal rate of anilinecontaining were investigated. When pH is 3.5, the concentrations of H2O2 and Fe2+ are 28mmol/L and 2.8mmol/L respectively in wastewater, the experimental result indicated that the removal rate of aniline can reach 98% and the removal rate of CODCr is 76% under the conditions of room temperature, the raw wastewater aniline 800mg/L , and the ratio of BOD5/CODCr can reach 0.32 after treatment. The effluent can be easily treated by conventional biochemical method.
OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Anilinecontaining dye wastewater was treated with Fenton's reagent oxidation method. Some factors which influence the removal rate of anilinecontaining were investigated. When pH is 3.5, the concentrations of H2O2 and Fe2+ are 28mmol/L and 2.8mmol/L respectively in wastewater, the experimental result indicated that the removal rate of aniline can reach 98% and the removal rate of CODCr is 76% under the conditions of room temperature, the raw wastewater aniline 800mg/L , and the ratio of BOD5/CODCr can reach 0.32 after treatment. The effluent can be easily treated by conventional biochemical method.
Key concepts: Aniline, Wastewater, Effluent, Reagent, Chemistry, Nuclear chemistry, Catalysis, Environmental chemistry