Tribological Properties of the Ekonol /G /MoS_2/PEEK Composite under Different Loads
Dai Chun-xia
Abstract
Dai Chun-xia
Abstract
Ekonol/G/MoS2/PEEK composite was prepared by the on-the-mold process. The tribological behavior was investigated. The worn surface of the composite was examined using SEM, and the wear mechanism was discussed. The friction coefficient of the composite was independent the loads. With the increase of the load, the wear weight loss rised, the wear resistance lowered, and the wear mechanism was changed from adhesive wear to abrasive wear.
OpenAlex reports 2 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Ekonol/G/MoS2/PEEK composite was prepared by the on-the-mold process. The tribological behavior was investigated. The worn surface of the composite was examined using SEM, and the wear mechanism was discussed. The friction coefficient of the composite was independent the loads. With the increase of the load, the wear weight loss rised, the wear resistance lowered, and the wear mechanism was changed from adhesive wear to abrasive wear.
Key concepts: Tribology, Materials science, Peek, Abrasive, Composite number, Composite material, Friction coefficient, Wear resistance