Calcium Concentration and pH of the Periapical Environment after Applying Calcium Hydroxide into Root Canals In Vitro

The purpose of the present study was to determine both calcium concentration and pH in the periapical region after application of 1 of 4 different calcium hydroxide preparations into experimental root canals. Fifty root canal models were divided into five groups: group 1--calcium hydroxide was mixed with distilled water at a powder/water weight ratio of 38%; group 2--calcium hydroxide was mixed with distilled water at 44%; group 3--calcium hydroxide was mixed with distilled water at 50%; group 4--calcium hydroxide powder only was used; and group 5-the control group, in which nothing was applied to the canals. All samples were immersed in distilled water maintained at 37 degrees C. Calcium concentration and pH of the distilled water were measured after 3 days, 7 days, and then at weekly intervals up to 15 wk, during which time the storage medium was renewed after each measurement. Calcium concentration and the change in pH of the distilled water were statistically quicker and greater in groups 1 to 3 (mixture groups) than group 4 (powder only) (p < 0.05). The highest calcium concentration (peak Ca2+ release) was observed after 3 days for the mixture groups, whereas that for the powder only group was found at 7 days. Peak pH change was found after 14 days for the mixture groups, whereas that for the powder only group was found at 49 days. After peaking, all groups showed a decline of the pH over time. These results suggest that the time required for optimum intracanal activity when using calcium hydroxide mixtures is at least 2 wk.