2008IEEE Transactions on Circuits & Systems II Express BriefsRequires access

A 1-V 1.25-GS/S 8-Bit Self-Calibrated Flash ADC in 90-nm Digital CMOS

Hairong Yu, Mau-Chung Frank Chang

Open publisher page 65 citations

Abstract

We present an 8-bit 1.25-GS/s flash analog-to-digital converter (ADC) in 90-nm digital CMOS with wide analog input bandwidth and low power dissipation. The ADC employs two key techniques: a self-biased track-and-hold amplifier which enhances the ADC full-scale voltage and enables the converter operating under a single 1-V supply; and an improved calibration scheme based on reference pre-distortion to enhance the ADC linearity without sacrificing its sampling speed. The prototype converter thus achieves 7-, 6.9-, 6.5–bit ENOB at 1.25 GS/s for input signal frequencies of 10 MHz, 600 MHz, and 1.3 GHz, respectively, and better than 52-dB SFDR across the full Nyquist-band, while dissipating 207 mW from a single 1-V supply.

About this research paper

What this paper is about

We present an 8-bit 1.25-GS/s flash analog-to-digital converter (ADC) in 90-nm digital CMOS with wide analog input bandwidth and low power dissipation. The ADC employs two key techniques: a self-biased track-and-hold amplifier which enhances the ADC full-scale voltage and enables the converter operating under a single 1-V supply; and an improved calibration scheme based on reference pre-distortion to enhance the ADC linearity without sacrificing its sampling speed. The prototype converter thus achieves 7-, 6.9-, 6.5–bit ENOB at 1.25 GS/s for input signal frequencies of 10 MHz, 600 MHz, and 1.3 GHz, respectively, and better than 52-dB SFDR across the full Nyquist-band, while dissipating 207 mW from a single 1-V supply.

Why it matters

OpenAlex reports 65 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

We present an 8-bit 1.25-GS/s flash analog-to-digital converter (ADC) in 90-nm digital CMOS with wide analog input bandwidth and low power dissipation. The ADC employs two key techniques: a self-biased track-and-hold amplifier which enhances the ADC full-scale voltage and enables the converter operating under a single 1-V supply; and an improved calibration scheme based on reference pre-distortion to enhance the ADC linearity without sacrificing its sampling speed. The prototype converter thus achieves 7-, 6.9-, 6.5–bit ENOB at 1.25 GS/s for input signal frequencies of 10 MHz, 600 MHz, and 1.3 GHz, respectively, and better than 52-dB SFDR across the full Nyquist-band, while dissipating 207 mW from a single 1-V supply.

Key concepts: Flash ADC, Effective number of bits, Spurious-free dynamic range, CMOS, Analog-to-digital converter, Linearity, Electronic engineering, Comparator

Related papers

Back to paper searchBrowse research topicsOriginal source