Millimeter-Wave Low Power and Miniature CMOS Multicascode Low-Noise Amplifiers with Noise Reduction Topology
Bo-Jr Huang, Kun‐You Lin, Huei Wang
Abstract
Bo-Jr Huang, Kun‐You Lin, Huei Wang
Abstract
In this paper, the design and analysis of CMOS multicascode configuration with noise reduction topology are proposed. Two low power and miniature low-noise amplifiers (LNAs) were designed and fabricated for demonstration. One with cascode device was designed at V -band in 65-nm process, and the other with triple-cascode structure was fabricated at Q -band in 0.13-¿ m technology. To minimize the noise figure and maximize the small-signal gain, inductors are designed and placed between transistors of the cascode and triple-cascode configurations. Based on this approach, the Q-band LNA has a gain of 14.3 dB and a noise figure of 3.8 dB at 38 GHz, with a power consumption of 28.8 mW. The V-band LNA presents a gain of 14.4 dB and a noise figure of 4.5 dB at 54.5 GHz, with a power consumption of 10 mW. The chip size of the V- and Q-band LNAs are 0.55 × 0.45 mm2and 0.42 × 0.6 mm2, including all the testing pads. Compared with the conventional cascode LNAs, the proposed cascode LNA shows better noise figure and lower power consumption whereas the triple-cascode LNA features higher gain performance.
OpenAlex reports 127 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
In this paper, the design and analysis of CMOS multicascode configuration with noise reduction topology are proposed. Two low power and miniature low-noise amplifiers (LNAs) were designed and fabricated for demonstration. One with cascode device was designed at V -band in 65-nm process, and the other with triple-cascode structure was fabricated at Q -band in 0.13-¿ m technology. To minimize the noise figure and maximize the small-signal gain, inductors are designed and placed between transistors of the cascode and triple-cascode configurations. Based on this approach, the Q-band LNA has a gain of 14.3 dB and a noise figure of 3.8 dB at 38 GHz, with a power consumption of 28.8 mW. The V-band LNA presents a gain of 14.4 dB and a noise figure of 4.5 dB at 54.5 GHz, with a power consumption of 10 mW. The chip size of the V- and Q-band LNAs are 0.55 × 0.45 mm2and 0.42 × 0.6 mm2, including all the testing pads. Compared with the conventional cascode LNAs, the proposed cascode LNA shows better noise figure and lower power consumption whereas the triple-cascode LNA features higher gain performance.
Key concepts: Cascode, Noise figure, Amplifier, CMOS, Electrical engineering, Monolithic microwave integrated circuit, Low-noise amplifier, Transistor