2009•Materials science forumRequires access

Microstructures and Properties of Fiber Laser Welded ACM522 Magnesium Alloy Joint

Jun Liu, Jun Dong, Kenji Shinozaki

Abstract

The microstructure, mechanical properties, hardness, rules and mechanism of various parameters on formation of weld bead of Mg alloy ACM522 using a fiber laser welding were investigated. The results showed that sound welds without major defects could be produced and the mechanical properties of welding joints were good. With the increase of laser power, the penetration depth and bead width of the weld bead all increased. The mechanism of welding transformed from the conduction welding mode to the deep penetration welding mode and the weld beads aspect ratio became higher with the increase of heat input. The microstructure of weld metal was significantly finer and the hardness of weld metal was higher than that of the base metal.

About this research paper

What this paper is about

Why it matters

OpenAlex reports 7 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Key concepts: Materials science, Welding, Microstructure, Laser beam welding, Heat-affected zone, Composite material, Metallurgy, Penetration (warfare)