2012•Unpublished venueRequires access
Comparison of radiometric gain of optical satellite sensors using Tuz Golu radiometrically calibrated test site
Hilal Özen, Nigel Fox, Andrew Deadman, Irina Behnert, P M Harris, Sevgi Zübeyde Gürbüz, Linan Yuan, Derek Griffith, Morakot Kaewmanee, Amornchai Prakobya, C. Musana, Flávio Jorge Ponzoni, D. Lee, Y. Lee, Yann G. Boucher, Françoise Viallefont, P. Rolland, Dennis Helder, Larry Leigh, Kurt Thome, Sindy Sterckx, Els Knaeps, D. Raeymaekers, P. Henry
Open publisher page 1 citations
Abstract
Pre-flight radiometric calibration is critical to ensure that sensors can demonstrate that they meet their design performance specification. However, following launch it is critical that this performance is verified and in particular that the radiometric accuracy is validated or if necessary corrected. As Earth observation data becomes widely used it becomes increasingly important that data from each satellite sensor can be relied upon in the short and longer term and any potential biases between sensors can be removed. This post-launch calibration/validation is thus recognized as a key activity by all satellite operators. There are various methods available for carrying out this post-launch vicarious calibration but one of the most common and generic approaches is to use a dedicated and characterised “test site”. In such a method, ground based measurements of surface reflectance/radiance using similar solar illumination angles and sensor view angles (or at least corrected for these) is propagated to the top of the atmosphere (TOA) using a radiative transfer code. For the highest accuracy, surface measurements should be made within a few minutes of the satellite overpass and the characteristics of the atmosphere at that time also measured, particularly its optical depth.