ScholarLens Back to search
2009•AIJ Journal of Technology and DesignOpen access

INFLUENCES OF TENON SIZE ON PULL OUT AND BENDING STRENGTH OF MORTISE-TENON JOINT WITH PIN

Yasutaka IRIE, Shinya OIFUJI

Open full text 1 citations

Abstract

In order to investigate the most suitable tenon size of the mortise-tenon joint with pin, we carried out the static horizontal loading tests. The main results obtained from these tests and analytical investigations are as follows.Mortisize-tenon joint thickness of which is 45mm improves the stiffness and strength by about 50% compared with that of using tenon of 30mm thickness. The analytical model shown in Fig. 19 expresses the stiffness and bearing force after yielding point.

Open-access reader

About this research paper

What this paper is about

In order to investigate the most suitable tenon size of the mortise-tenon joint with pin, we carried out the static horizontal loading tests. The main results obtained from these tests and analytical investigations are as follows.Mortisize-tenon joint thickness of which is 45mm improves the stiffness and strength by about 50% compared with that of using tenon of 30mm thickness. The analytical model shown in Fig. 19 expresses the stiffness and bearing force after yielding point.

Why it matters

OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

In order to investigate the most suitable tenon size of the mortise-tenon joint with pin, we carried out the static horizontal loading tests. The main results obtained from these tests and analytical investigations are as follows.Mortisize-tenon joint thickness of which is 45mm improves the stiffness and strength by about 50% compared with that of using tenon of 30mm thickness. The analytical model shown in Fig. 19 expresses the stiffness and bearing force after yielding point.

Key concepts: Mortise and tenon, Joint (building), Stiffness, Structural engineering, Bending stiffness, Bending, Joint stiffness, Materials science

Related papers

Related paper 1Related paper 2Related paper 3
Back to paper searchBrowse research topicsOriginal source
INFLUENCES OF TENON SIZE ON PULL OUT AND BENDING STRENGTH OF MORTISE-TENON JOINT WITH PIN — Research Paper | ScholarLens