1998Applied Physics LettersRequires access

High quantum efficiency II–VI photodetectors for the blue and blue-violet spectral range

M. Ehinger, Christoph T. Koch, Maria das Graças Andrade Korn, D. Albert, J. Nürnberger, V. Hock, W. Faschinger, G. Landwehr

Open publisher page 16 citations

Abstract

We have fabricated II–VI wide gap hetero PIN photodiodes made of ZnMgSSe with excellent structural and interface quality and with a high external quantum efficiency of about 60%, which is close to the theoretical limit. The internal quantum efficiency reaches peak values of more than 80%. The onset of the sensitivity is very sharp, leading to a quantum efficiency less than 10−4 at wavelength 60 nm below the band gap. Using the wide range of energy gaps from 2.68 to 3.1 eV, it is possible to fabricate wavelength selective detectors if the energy gap of the top p-type layer is chosen slightly higher than that of the intrinsic zone. The dark current is below 0.1 pA/mm2. In the low signal limit, the noise equivalent power can be estimated to be below 10−15 WHz/mm2 at the peak external quantum efficiency, surpassing ultraviolet optimized Si detectors.

About this research paper

What this paper is about

We have fabricated II–VI wide gap hetero PIN photodiodes made of ZnMgSSe with excellent structural and interface quality and with a high external quantum efficiency of about 60%, which is close to the theoretical limit. The internal quantum efficiency reaches peak values of more than 80%. The onset of the sensitivity is very sharp, leading to a quantum efficiency less than 10−4 at wavelength 60 nm below the band gap. Using the wide range of energy gaps from 2.68 to 3.1 eV, it is possible to fabricate wavelength selective detectors if the energy gap of the top p-type layer is chosen slightly higher than that of the intrinsic zone. The dark current is below 0.1 pA/mm2. In the low signal limit, the noise equivalent power can be estimated to be below 10−15 WHz/mm2 at the peak external quantum efficiency, surpassing ultraviolet optimized Si detectors.

Why it matters

OpenAlex reports 16 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

We have fabricated II–VI wide gap hetero PIN photodiodes made of ZnMgSSe with excellent structural and interface quality and with a high external quantum efficiency of about 60%, which is close to the theoretical limit. The internal quantum efficiency reaches peak values of more than 80%. The onset of the sensitivity is very sharp, leading to a quantum efficiency less than 10−4 at wavelength 60 nm below the band gap. Using the wide range of energy gaps from 2.68 to 3.1 eV, it is possible to fabricate wavelength selective detectors if the energy gap of the top p-type layer is chosen slightly higher than that of the intrinsic zone. The dark current is below 0.1 pA/mm2. In the low signal limit, the noise equivalent power can be estimated to be below 10−15 WHz/mm2 at the peak external quantum efficiency, surpassing ultraviolet optimized Si detectors.

Key concepts: Quantum efficiency, Photodiode, Optoelectronics, Dark current, Photodetector, Band gap, Materials science, Wavelength

Related papers

Back to paper searchBrowse research topicsOriginal source
High quantum efficiency II–VI photodetectors for the blue and blue-violet spectral range — Research Paper | ScholarLens