2012•Proceeding of THMT-12. Proceedings of the Seventh International Symposium On Turbulence, Heat and Mass Transfer Palermo, Italy, 24-27 September, 2012Requires access

Numerical and experimental study of a micro gas turbine combustor

Fabrizio Reale, R. Calabria, Fabio Chiariello, Patrizio Massoli, Rocco Pagliara, Renzo Piazzesi

Open publisher page 1 citations

Abstract

The behavior of the combustor of a Turbec T100P 100 kWe micro gas turbine (MGT) is analyzed at different load conditions by means of computational fluid dynamic modeling (CFD) and experimental investigation. CFD analysis results, comparing various numerical models for a given set of boundary conditions, are discussed in the paper. The k-ε and k-ω SST Reynolds Averaged Navier Stokes models were used to model the turbulence while for the combustion Finite Rate – Eddy Dissipation model was adopted. Westbrook and Dryer's 2-step kinetic mechanism and Zeldovich's mechanism were used to model methane oxidation and NO formation, respectively. The numerical results from the two turbulence models show a similar combustor behavior. The computed concentrations of O2, CO2 and NO are in good agreement with the experimental data, while CO concentration is underestimated of one order of magnitude.

About this research paper

What this paper is about

The behavior of the combustor of a Turbec T100P 100 kWe micro gas turbine (MGT) is analyzed at different load conditions by means of computational fluid dynamic modeling (CFD) and experimental investigation. CFD analysis results, comparing various numerical models for a given set of boundary conditions, are discussed in the paper. The k-ε and k-ω SST Reynolds Averaged Navier Stokes models were used to model the turbulence while for the combustion Finite Rate – Eddy Dissipation model was adopted. Westbrook and Dryer's 2-step kinetic mechanism and Zeldovich's mechanism were used to model methane oxidation and NO formation, respectively. The numerical results from the two turbulence models show a similar combustor behavior. The computed concentrations of O2, CO2 and NO are in good agreement with the experimental data, while CO concentration is underestimated of one order of magnitude.

Why it matters

OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The behavior of the combustor of a Turbec T100P 100 kWe micro gas turbine (MGT) is analyzed at different load conditions by means of computational fluid dynamic modeling (CFD) and experimental investigation. CFD analysis results, comparing various numerical models for a given set of boundary conditions, are discussed in the paper. The k-ε and k-ω SST Reynolds Averaged Navier Stokes models were used to model the turbulence while for the combustion Finite Rate – Eddy Dissipation model was adopted. Westbrook and Dryer's 2-step kinetic mechanism and Zeldovich's mechanism were used to model methane oxidation and NO formation, respectively. The numerical results from the two turbulence models show a similar combustor behavior. The computed concentrations of O2, CO2 and NO are in good agreement with the experimental data, while CO concentration is underestimated of one order of magnitude.

Key concepts: Combustor, Computational fluid dynamics, Turbulence, Mechanics, Combustion, Turbulence modeling, Turbine, Large eddy simulation

Related papers

Back to paper searchBrowse research topicsOriginal source
Numerical and experimental study of a micro gas turbine combustor — Research Paper | ScholarLens