Experimental Investigations on Thermophysical, Tribological and Rheological Properties of MoS2 and WS2 Based Nanolubricants with Castor Oil as Base Lubricant

Molybdenum disulfide (MoS2) and Tungsten disulfide (WS2) nanoparticles addition to castor oil produce nano lubricants of novel properties. These nanomaterial additives are dispersed thoroughly in the liquid phase and are intended to boost the base fluid's thermo-physical, rheological, and tribological properties. All these properties have been studied by varying concentrations of nanoparticles from 0.05 to 2.5%. The size of both nanoparticles are in the range of <20nm. The density of nano lubricants was found to change with respect to nanoparticle concentration and temperature. The density increases from 0.06 to 0.6% with respect to the increase in concentration and decreases by 4%, for increasing temperature from 25 to 100 o C. A significant (15 %) increase in thermal conductivity with MoS2 nanoparticles in lubricants could be observed while with WS2 nanoparticles only 8 % enhancement was observed. The rheological study suggests that nano lubricants have better dynamic viscosity and shear stress than neat castor oil. A tribology study showed improved lubrication properties of the nanolubricants as compared with base castor oil. The addition of MoS2 and WS2 nanoparticles in castor oil decreased the friction coefficient by 53 % and 42 %, respectively, and reduced the wear scar diameter by 24% and 20 %, respectively, as compared to base castor oil. This study was done to develop nonedible vegetable oil based nanolubricants exploring their potential as emerging lubricants.