Investigation of Spindt Cold Cathode Electron Guns for Terahertz Traveling Wave Tubes

In this work, a Spindt cold cathode electron gun with a PPM (periodic permanent magnet) focusing system for a terahertz TWT (traveling wave tube) was designed and simulated based on the Pierce electron gun structure. More specifically, a new 3D (three dimensional) emission model was used, where the cathode radius of the electron gun was 1 mm and the cathode current was 30 mA, with an emitting half angle of about 28°. It was demonstrated that the electron beam was well focused with an electron beam radius of 0.3 mm and a filling ratio of 0.5 when the maximum value of the PPM field along with the axis was 0.122T. According to the simulation results, a planar cold cathode electron gun was developed. Measurements demonstrated that the I/V characteristics of the cold cathode gun were consistent with that of a cold cathode, revealing that the electrons emitted from the cathode are not intercepted when passing through the electron gun.