The use of coarse aggregate from fly ash and its effect on the mechanical properties of concrete
AR Indra Tjahjani, Jonbi, Daral Suraedi, Okeu Aziz Maulana, Ressy Warisatu Awwaliyah, Teuku Rifqi Maulana
Abstract
Open-access reader
AR Indra Tjahjani, Jonbi, Daral Suraedi, Okeu Aziz Maulana, Ressy Warisatu Awwaliyah, Teuku Rifqi Maulana
Abstract
Open-access reader
The amount of fly ash waste is increasing, causing environmental and storage problems. One solution is to utilize the fly ash as an artificial aggregate. This research focuses on getting the right formula for mixing fly ash, cement, and superplasticizer (SP). The tests carried out were compressive strength at 3, 14, 28, and 56 days. The results showed that the best composition with a ratio of cement: fly ash of 1:4 added with a superplasticizer of 1.2% by weight of the mixture resulted in a compressive strength of 79 MPa at 56 days of age.
A significance statement is not available in the OpenAlex record.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
The amount of fly ash waste is increasing, causing environmental and storage problems. One solution is to utilize the fly ash as an artificial aggregate. This research focuses on getting the right formula for mixing fly ash, cement, and superplasticizer (SP). The tests carried out were compressive strength at 3, 14, 28, and 56 days. The results showed that the best composition with a ratio of cement: fly ash of 1:4 added with a superplasticizer of 1.2% by weight of the mixture resulted in a compressive strength of 79 MPa at 56 days of age.
Key concepts: Fly ash, Superplasticizer, Compressive strength, Aggregate (composite), Cement, Materials science, Mixing (physics), Composite material