Initial Design of a Novel Barge-Type Floating Offshore Wind Turbine in Shallow Water

The studies on floating offshore wind turbines (FOWTs) have been increasing over recent decades due to the growing interest in offshore renewable energy. The present paper proposes a barge platform with four moonpools to support the Technical University of Denmark 10 MW wind turbine for a designed water depth of 60 m. A 4 × 2 mooring system with eight mooring lines is also proposed for the barge platform. The main dimensions of the barge platform are optimally selected with respect to its preliminary hydrodynamic properties and potential financial benefit. The proposed barge-type FOWT is then demonstrated to be aligned with the DNV standard requirements in terms of its intact and damage stability. Furthermore, coupled time-domain simulations are conducted for the proposed barge FOWT with mooring under the selected environmental and operational conditions by using Simo-Riflex-AeroDyn (SRA). Through decay test simulations, the natural periods of the barge-type FOWT are demonstrated to be within the DNV recommended ranges. The proposed mooring system is also benchmarked with the 3 × 3 mooring concept that was used for a 3 MW barge-type FOWT installed in Kitakyushu. The response magnitudes of the barge platform and mooring line tension are similar to both mooring systems, and thus the 4 × 2 mooring system is preferred due to its lower cost. In addition, the proposed barge platform is preliminarily demonstrated to be able to survive for the 50-year extreme environmental conditions under parked wind turbine status, as well as the normal environmental conditions under the operating status.