2019Unpublished venueOpen access

Evaluation of equivalent black carbon (EBC) source appointment using observations from Switzerland between 2008 and 2018

Stuart K. Grange, Hanspeter Lötscher, Andrea Fischer, Lukas Emmenegger, Christoph Hueglin

Open full text 3 citations

Abstract

Abstract. Black carbon (BC) or soot is a constituent of particulate matter (PM) which is relevant for negative human health and climate effects, and despite the lack of legal limits, it is recognised as an important atmospheric pollutant to monitor, understand, and control. Aethalometers are instruments which continuously monitor BC by measuring absorption at a number of distinct wavelengths. If collocated elemental carbon (EC) observations are used to transform these values into BC mass, by convention, the result is named equivalent black carbon (EBC). BC emitted by different combustion processes have different optical absorption characteristics and this can be used to apportion EBC mass into traffic (EBCTR) and woodburning (EBCWB) components with a data processing technique known as the aethalometer model. The aethalometer model was applied to six EBC monitoring sites across Switzerland (using data between 2008 and 2018) and was evaluated by investigating diurnal cycles, model coefficients, and ambient temperature dependence of the two EBC components. For one monitoring site, San Vittore, the aethalometer model failed to produce plausible outputs. The reason for this failure was likely due to a high load of freshly emitted wood smoke during the winter which should be thought of as a third distinct emission source. After model evaluation, the trend analysis indicated that EBCTR concentrations at the remaining five locations significantly decreased between 2008 and 2018 illustrating the successful widespread installation of diesel particulate filters (DPF) within the vehicle fleet. EBCWB also demonstrated significant deceases in most monitoring locations, but not at a monitoring site south of the Alps with a high PM load sourced from biomass burning. This indicated that the management of woodburning has be ineffective at reducing BC emissions and concentrations for this, likely representative location. The EBC/PM2.5 ratios suggested that EBC contributes 6–13 % of the PM2.5 mass in Switzerland which is important for soot and PM source management. The aethalometer model is a useful data analysis procedure, but can fail under certain conditions, thus, careful evaluation is required to ensure the method is robust and suitable in other locations.

Open-access reader

About this research paper

What this paper is about

Abstract. Black carbon (BC) or soot is a constituent of particulate matter (PM) which is relevant for negative human health and climate effects, and despite the lack of legal limits, it is recognised as an important atmospheric pollutant to monitor, understand, and control. Aethalometers are instruments which continuously monitor BC by measuring absorption at a number of distinct wavelengths. If collocated elemental carbon (EC) observations are used to transform these values into BC mass, by convention, the result is named equivalent black carbon (EBC). BC emitted by different combustion processes have different optical absorption characteristics and this can be used to apportion EBC mass into traffic (EBCTR) and woodburning (EBCWB) components with a data processing technique known as the aethalometer model. The aethalometer model was applied to six EBC monitoring sites across Switzerland (using data between 2008 and 2018) and was evaluated by investigating diurnal cycles, model coefficients, and ambient temperature dependence of the two EBC components. For one monitoring site, San Vittore, the aethalometer model failed to produce plausible outputs. The reason for this failure was likely due to a high load of freshly emitted wood smoke during the winter which should be thought of as a third distinct emission source. After model evaluation, the trend analysis indicated that EBCTR concentrations at the remaining five locations significantly decreased between 2008 and 2018 illustrating the successful widespread installation of diesel particulate filters (DPF) within the vehicle fleet. EBCWB also demonstrated significant deceases in most monitoring locations, but not at a monitoring site south of the Alps with a high PM load sourced from biomass burning. This indicated that the management of woodburning has be ineffective at reducing BC emissions and concentrations for this, likely representative location. The EBC/PM2.5 ratios suggested that EBC contributes 6–13 % of the PM2.5 mass in Switzerland which is important for soot and PM source management. The aethalometer model is a useful data analysis procedure, but can fail under certain conditions, thus, careful evaluation is required to ensure the method is robust and suitable in other locations.

Why it matters

OpenAlex reports 3 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Abstract. Black carbon (BC) or soot is a constituent of particulate matter (PM) which is relevant for negative human health and climate effects, and despite the lack of legal limits, it is recognised as an important atmospheric pollutant to monitor, understand, and control. Aethalometers are instruments which continuously monitor BC by measuring absorption at a number of distinct wavelengths. If collocated elemental carbon (EC) observations are used to transform these values into BC mass, by convention, the result is named equivalent black carbon (EBC). BC emitted by different combustion processes have different optical absorption characteristics and this can be used to apportion EBC mass into traffic (EBCTR) and woodburning (EBCWB) components with a data processing technique known as the aethalometer model. The aethalometer model was applied to six EBC monitoring sites across Switzerland (using data between 2008 and 2018) and was evaluated by investigating diurnal cycles, model coefficients, and ambient temperature dependence of the two EBC components. For one monitoring site, San Vittore, the aethalometer model failed to produce plausible outputs. The reason for this failure was likely due to a high load of freshly emitted wood smoke during the winter which should be thought of as a third distinct emission source. After model evaluation, the trend analysis indicated that EBCTR concentrations at the remaining five locations significantly decreased between 2008 and 2018 illustrating the successful widespread installation of diesel particulate filters (DPF) within the vehicle fleet. EBCWB also demonstrated significant deceases in most monitoring locations, but not at a monitoring site south of the Alps with a high PM load sourced from biomass burning. This indicated that the management of woodburning has be ineffective at reducing BC emissions and concentrations for this, likely representative location. The EBC/PM2.5 ratios suggested that EBC contributes 6–13 % of the PM2.5 mass in Switzerland which is important for soot and PM source management. The aethalometer model is a useful data analysis procedure, but can fail under certain conditions, thus, careful evaluation is required to ensure the method is robust and suitable in other locations.

Key concepts: Aethalometer, Environmental science, Soot, Carbon black, Particulates, Mass concentration (chemistry), Atmospheric sciences, Meteorology

Related papers

Back to paper searchBrowse research topicsOriginal source
Evaluation of equivalent black carbon (EBC) source appointment using observations from Switzerland between 2008 and 2018 — Research Paper | ScholarLens