2000•Biochemistry and Cell BiologyRequires access

Characterization of the interaction of recombinant apolipoprotein(a) with modified fibrinogen surfaces and fibrin clots

Waheed Sangrar, Marlys L. Koschinsky

Open publisher page 12 citations

Abstract

Elevated levels of lipoprotein(a) [Lp(a)] in plasma are a significant risk factor for the development of atherosclerotic disease, a property which may arise from the ability of this lipoprotein to inhibit fibrinolysis. In the present study we have quantitated the binding of recombinant forms of apolipoprotein(a) [17K and 12K r-apo(a); containing 8 and 3 copies, respectively, of the major repeat kringle sequence (kringle IV type 2)] to modified fibrinogen surfaces. Iodinated 17K and 12K r-apo(a) bound to immobilized thrombin-modified fibrinogen (i.e., fibrin) surfaces with similar affinities (Kd ~ 1.2 - 1.6 µM). The total concentration of binding sites (Bmax) present on the fibrin surface was ~4-fold greater for the 12K than for the 17K (Bmax values of 0.81 ± 0.09 nM, and 0.20 ± 0.01 nM respectively), suggesting that the total binding capacity on fibrin surfaces is reduced for larger apolipoprotein(a) (apo(a)) species. Interestingly, binding of apo(a) to intact fibrin was not detected as assessed by measurement of intrinsic fluorescence of free apo(a) present in the supernatants of sedimented fibrin clots. In other experiments, the total concentration apo(a) binding sites available on plasmin-modified fibrinogen surfaces was shown to be 13.5-fold higher than the number of sites available on unmodified fibrin surfaces (Bmax values of 2.7 ± 0.3 nM and 0.20 ± 0.01 nM respectively) while the affinity of apo(a) for these surfaces was similar. The increase in Bmax was correlated with plasmin-mediated exposure of C-terminal lysines since treatment of plasmin-modified fibrinogen surfaces with carboxypeptidase B produced a significant decrease in total binding signal as detected by ELISA (enzyme linked immunosorbent assay). Taken together, these data suggest that apo(a) binds to fibrin with poor affinity (low µM) and that the total concentration of apo(a) binding sites available on modified-fibrinogen surfaces is affected by both apo(a) isoform size and by the increased availability of C-terminal lysines on plasmin-degraded fibrinogen surfaces. However, the low affinity of apo(a) for fibrin indicates that Lp(a) may inhibit fibrinolysis through a mechanism distinct from binding to fibrin, such as binding to plasminogen.Key words: fibrinolysis, lipoprotein(a), plasminogen activation.

About this research paper

What this paper is about

Elevated levels of lipoprotein(a) [Lp(a)] in plasma are a significant risk factor for the development of atherosclerotic disease, a property which may arise from the ability of this lipoprotein to inhibit fibrinolysis. In the present study we have quantitated the binding of recombinant forms of apolipoprotein(a) [17K and 12K r-apo(a); containing 8 and 3 copies, respectively, of the major repeat kringle sequence (kringle IV type 2)] to modified fibrinogen surfaces. Iodinated 17K and 12K r-apo(a) bound to immobilized thrombin-modified fibrinogen (i.e., fibrin) surfaces with similar affinities (Kd ~ 1.2 - 1.6 µM). The total concentration of binding sites (Bmax) present on the fibrin surface was ~4-fold greater for the 12K than for the 17K (Bmax values of 0.81 ± 0.09 nM, and 0.20 ± 0.01 nM respectively), suggesting that the total binding capacity on fibrin surfaces is reduced for larger apolipoprotein(a) (apo(a)) species. Interestingly, binding of apo(a) to intact fibrin was not detected as assessed by measurement of intrinsic fluorescence of free apo(a) present in the supernatants of sedimented fibrin clots. In other experiments, the total concentration apo(a) binding sites available on plasmin-modified fibrinogen surfaces was shown to be 13.5-fold higher than the number of sites available on unmodified fibrin surfaces (Bmax values of 2.7 ± 0.3 nM and 0.20 ± 0.01 nM respectively) while the affinity of apo(a) for these surfaces was similar. The increase in Bmax was correlated with plasmin-mediated exposure of C-terminal lysines since treatment of plasmin-modified fibrinogen surfaces with carboxypeptidase B produced a significant decrease in total binding signal as detected by ELISA (enzyme linked immunosorbent assay). Taken together, these data suggest that apo(a) binds to fibrin with poor affinity (low µM) and that the total concentration of apo(a) binding sites available on modified-fibrinogen surfaces is affected by both apo(a) isoform size and by the increased availability of C-terminal lysines on plasmin-degraded fibrinogen surfaces. However, the low affinity of apo(a) for fibrin indicates that Lp(a) may inhibit fibrinolysis through a mechanism distinct from binding to fibrin, such as binding to plasminogen.Key words: fibrinolysis, lipoprotein(a), plasminogen activation.

Why it matters

OpenAlex reports 12 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Elevated levels of lipoprotein(a) [Lp(a)] in plasma are a significant risk factor for the development of atherosclerotic disease, a property which may arise from the ability of this lipoprotein to inhibit fibrinolysis. In the present study we have quantitated the binding of recombinant forms of apolipoprotein(a) [17K and 12K r-apo(a); containing 8 and 3 copies, respectively, of the major repeat kringle sequence (kringle IV type 2)] to modified fibrinogen surfaces. Iodinated 17K and 12K r-apo(a) bound to immobilized thrombin-modified fibrinogen (i.e., fibrin) surfaces with similar affinities (Kd ~ 1.2 - 1.6 µM). The total concentration of binding sites (Bmax) present on the fibrin surface was ~4-fold greater for the 12K than for the 17K (Bmax values of 0.81 ± 0.09 nM, and 0.20 ± 0.01 nM respectively), suggesting that the total binding capacity on fibrin surfaces is reduced for larger apolipoprotein(a) (apo(a)) species. Interestingly, binding of apo(a) to intact fibrin was not detected as assessed by measurement of intrinsic fluorescence of free apo(a) present in the supernatants of sedimented fibrin clots. In other experiments, the total concentration apo(a) binding sites available on plasmin-modified fibrinogen surfaces was shown to be 13.5-fold higher than the number of sites available on unmodified fibrin surfaces (Bmax values of 2.7 ± 0.3 nM and 0.20 ± 0.01 nM respectively) while the affinity of apo(a) for these surfaces was similar. The increase in Bmax was correlated with plasmin-mediated exposure of C-terminal lysines since treatment of plasmin-modified fibrinogen surfaces with carboxypeptidase B produced a significant decrease in total binding signal as detected by ELISA (enzyme linked immunosorbent assay). Taken together, these data suggest that apo(a) binds to fibrin with poor affinity (low µM) and that the total concentration of apo(a) binding sites available on modified-fibrinogen surfaces is affected by both apo(a) isoform size and by the increased availability of C-terminal lysines on plasmin-degraded fibrinogen surfaces. However, the low affinity of apo(a) for fibrin indicates that Lp(a) may inhibit fibrinolysis through a mechanism distinct from binding to fibrin, such as binding to plasminogen.Key words: fibrinolysis, lipoprotein(a), plasminogen activation.

Key concepts: Fibrin, Fibrinogen, Plasmin, Apolipoprotein B, Lipoprotein(a), Chemistry, Fibrinolysis, Thrombin

Related papers

Back to paper searchBrowse research topicsOriginal source
Characterization of the interaction of recombinant apolipoprotein(a) with modified fibrinogen surfaces and fibrin clots — Research Paper | ScholarLens