Identification Method of Negative and Weak Damping Generator Sets Based on TLSESPRIT and Damping Torque Analysis
Rui Yu, Hang Jiang, Hongxun Li, Jian Sun, Jicheng Du, Weihua Luo, Minhao Lai
Abstract
Rui Yu, Hang Jiang, Hongxun Li, Jian Sun, Jicheng Du, Weihua Luo, Minhao Lai
Abstract
Aiming at the ultra-low frequency oscillation or low frequency phenomenon in power system, it is necessary to identify the negative or weak damping gensets which cause the oscillation accurately to formulate control measures ensuring the safe and stable operation of power grid. Therefore, this paper proposes an effective identification method based on a total least squares-estimation of signal parameters via rotational invariance techniques (TLS-ESPRIT) and damping torque analysis (DTA). In this method, firstly the dominant oscillation mode of each generator is extracted from measured signals (e.g. rotor speed, rotor angle, and active power) at its side by means of TLS-ESPRIT, and then corresponding damping torque coefficient can be obtained through the least square fitting method to determine whether the generator is the oscillation source of this oscillation mode. Finally, case studies are carried out on the 4-machine 2-area system. Simulation results indicate that the proposed method can accurately identify the native damping units.
A significance statement is not available in the OpenAlex record.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Aiming at the ultra-low frequency oscillation or low frequency phenomenon in power system, it is necessary to identify the negative or weak damping gensets which cause the oscillation accurately to formulate control measures ensuring the safe and stable operation of power grid. Therefore, this paper proposes an effective identification method based on a total least squares-estimation of signal parameters via rotational invariance techniques (TLS-ESPRIT) and damping torque analysis (DTA). In this method, firstly the dominant oscillation mode of each generator is extracted from measured signals (e.g. rotor speed, rotor angle, and active power) at its side by means of TLS-ESPRIT, and then corresponding damping torque coefficient can be obtained through the least square fitting method to determine whether the generator is the oscillation source of this oscillation mode. Finally, case studies are carried out on the 4-machine 2-area system. Simulation results indicate that the proposed method can accurately identify the native damping units.
Key concepts: Control theory (sociology), Damping torque, Low-frequency oscillation, Oscillation (cell signaling), Torque, Rotor (electric), Generator (circuit theory), Power (physics)