A numerical study on the effect of gasolie-hydrogen fuel blend on engine power and torque at medium and high engine speed
Abdul Kadir Asmahani
Abstract
Open-access reader
Abdul Kadir Asmahani
Abstract
Open-access reader
This thesis presented about the effect of gasoline-hydrogen fuel blend on engine power and torque at medium and high engine speed. The experiment had been done by using different ratios of gasoline and hydrogen fuel. The engine modelling was drawn by GT-Power software and was analyzed by GT-Post software. In this analysis, the ratio of gasoline and hydrogen were varied in order to analyze the power and torque of the engine. The ratios that had been used in this analysis were by increment of 10% for hydrogen fuel and decrement of 10% for gasoline fuel until both fuel reached 50%. The engine that has been used was a single cylinder engine with four stroke cycle, by using SI-inject. After the analyzation, we found that the power and torque of the engine is increased by the increasing of fuel ratio at both engine speeds. The values of engine power were increasing eventhough we run it at 3000 rpm and 6000 rpm but as for the torque, the values were higher at 3000 rpm but decreasing at 6000 rpm.
A significance statement is not available in the OpenAlex record.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
This thesis presented about the effect of gasoline-hydrogen fuel blend on engine power and torque at medium and high engine speed. The experiment had been done by using different ratios of gasoline and hydrogen fuel. The engine modelling was drawn by GT-Power software and was analyzed by GT-Post software. In this analysis, the ratio of gasoline and hydrogen were varied in order to analyze the power and torque of the engine. The ratios that had been used in this analysis were by increment of 10% for hydrogen fuel and decrement of 10% for gasoline fuel until both fuel reached 50%. The engine that has been used was a single cylinder engine with four stroke cycle, by using SI-inject. After the analyzation, we found that the power and torque of the engine is increased by the increasing of fuel ratio at both engine speeds. The values of engine power were increasing eventhough we run it at 3000 rpm and 6000 rpm but as for the torque, the values were higher at 3000 rpm but decreasing at 6000 rpm.
Key concepts: Petrol engine, Engine power, Automotive engineering, Torque, Gasoline, Four-stroke engine, Engine efficiency, Integrated engine pressure ratio