Half-Elliptical Resonator Lowpass Filter with a Wide Stopband for Low Band 5G Communication Systems
Rasoul Azadi, Saeed Roshani, Arez Nosratpour, Ali Lalbakhsh, Mohammad Hazhir Mozaffari
Abstract
Open-access reader
Rasoul Azadi, Saeed Roshani, Arez Nosratpour, Ali Lalbakhsh, Mohammad Hazhir Mozaffari
Abstract
Open-access reader
In this paper, a lowpass filter is designed using half elliptical resonators with a wide stopband. New formulas are presented to achieve a circuit model for the half elliptical resonators used in this work. Additionally, the transfer function and transmission zero equations are used to adjust the frequency of the transmission zeros of the filter. The cut-off frequency of the lowpass filter is 1.26 GHz with a sufficiently large stopband, extending from 1.48 GHz to 20 GHz. The proposed filter’s figure of merit is 62,520, demonstrating its outperformance compared to the state of the art. The filter is implemented on a RT-5880 substrate with a constant dielectric of 2.2, thickness of 31 mil and loss tangent of 0.0009. The LPF was fabricated and tested, showing good agreement between the simulated and measured results.
OpenAlex reports 12 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
In this paper, a lowpass filter is designed using half elliptical resonators with a wide stopband. New formulas are presented to achieve a circuit model for the half elliptical resonators used in this work. Additionally, the transfer function and transmission zero equations are used to adjust the frequency of the transmission zeros of the filter. The cut-off frequency of the lowpass filter is 1.26 GHz with a sufficiently large stopband, extending from 1.48 GHz to 20 GHz. The proposed filter’s figure of merit is 62,520, demonstrating its outperformance compared to the state of the art. The filter is implemented on a RT-5880 substrate with a constant dielectric of 2.2, thickness of 31 mil and loss tangent of 0.0009. The LPF was fabricated and tested, showing good agreement between the simulated and measured results.
Key concepts: Stopband, Elliptic filter, Low-pass filter, Filter (signal processing), Resonator, Prototype filter, Transition band, Butterworth filter