2021•International Journal of Heat and TechnologyOpen access

An Experimental Work on the Performance of Single Solar Still with Parabolic Trough Collector in Hot Climate Conditions

Hawraa Fadhel, Qahtan A. Abed, Dhafer Manea Hachim

Open full text 2 citations

Abstract

This study investigated the production of single slope solar still and the influence of combining with a parabolic trough collector. The effect of the different working fluid types on freshwater productivity, outlet working fluid temperature, heat gain, and thermal efficiency has been studied under the weather conditions of south city of Iraq/ Najaf (32° 1' N / 44° 1' E). The first type was water and the second type is nanofluid. The results of the comparison showed when using water as a working fluid flowing inside the receiving tube for different days; the highest temperatures were obtained at 12:00 pm, and the average productivity of distilled water was obtained in May and June 2021 were 4.5358 and 6.733 kg/m2/day respectively. While when using the nanofluid as a working fluid flowing inside the Parabolic Trough Collector (PTC) receiver tube, the outlet temperatures were rising for the same comparison days with an increase in the productivity of distilled water. Where the freshwater productivity during the day was 8.745328 kg /m2 /day as, and it was 9.018119 kg/m2/day during the other day. A productivity analysis was carried out for two different working fluid types (Water and nanofluid instead of water) as a fluid running inside the receiving tube of PTC. The freshwater produced from PTC (with nanofluid) was a 42.2% improvement in productivity compared with conventional PTC.

Open-access reader

About this research paper

What this paper is about

This study investigated the production of single slope solar still and the influence of combining with a parabolic trough collector. The effect of the different working fluid types on freshwater productivity, outlet working fluid temperature, heat gain, and thermal efficiency has been studied under the weather conditions of south city of Iraq/ Najaf (32° 1' N / 44° 1' E). The first type was water and the second type is nanofluid. The results of the comparison showed when using water as a working fluid flowing inside the receiving tube for different days; the highest temperatures were obtained at 12:00 pm, and the average productivity of distilled water was obtained in May and June 2021 were 4.5358 and 6.733 kg/m2/day respectively. While when using the nanofluid as a working fluid flowing inside the Parabolic Trough Collector (PTC) receiver tube, the outlet temperatures were rising for the same comparison days with an increase in the productivity of distilled water. Where the freshwater productivity during the day was 8.745328 kg /m2 /day as, and it was 9.018119 kg/m2/day during the other day. A productivity analysis was carried out for two different working fluid types (Water and nanofluid instead of water) as a fluid running inside the receiving tube of PTC. The freshwater produced from PTC (with nanofluid) was a 42.2% improvement in productivity compared with conventional PTC.

Why it matters

OpenAlex reports 2 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

This study investigated the production of single slope solar still and the influence of combining with a parabolic trough collector. The effect of the different working fluid types on freshwater productivity, outlet working fluid temperature, heat gain, and thermal efficiency has been studied under the weather conditions of south city of Iraq/ Najaf (32° 1' N / 44° 1' E). The first type was water and the second type is nanofluid. The results of the comparison showed when using water as a working fluid flowing inside the receiving tube for different days; the highest temperatures were obtained at 12:00 pm, and the average productivity of distilled water was obtained in May and June 2021 were 4.5358 and 6.733 kg/m2/day respectively. While when using the nanofluid as a working fluid flowing inside the Parabolic Trough Collector (PTC) receiver tube, the outlet temperatures were rising for the same comparison days with an increase in the productivity of distilled water. Where the freshwater productivity during the day was 8.745328 kg /m2 /day as, and it was 9.018119 kg/m2/day during the other day. A productivity analysis was carried out for two different working fluid types (Water and nanofluid instead of water) as a fluid running inside the receiving tube of PTC. The freshwater produced from PTC (with nanofluid) was a 42.2% improvement in productivity compared with conventional PTC.

Key concepts: Parabolic trough, Nanofluid, Working fluid, Distilled water, Solar still, Trough (economics), Environmental science, Materials science

Related papers

Back to paper searchBrowse research topicsOriginal source
An Experimental Work on the Performance of Single Solar Still with Parabolic Trough Collector in Hot Climate Conditions — Research Paper | ScholarLens