2021•EnergiesOpen access

Thermogravimetric and Kinetic Analysis of High-Temperature Thermal Conversion of Pine Wood Sawdust under CO2/Ar

Bao Wang, Yujie Li, Jianan Zhou, Yi Wang, Xun Tao, Xiang Zhang, Weiming Song

Open full text 17 citations

Abstract

The gasification behavior of pine wood sawdust was investigated in CO2 with different heating rates of 5, 10, 15, and 20 °C/min from room temperature to 1400 °C by thermogravimetric analysis (TGA) and mass spectrometry (MS). It was also examined under Ar to compare the differences observed under CO2 at heating rate of 10 °C/min. Kinetics of pine wood sawdust thermal decomposition was determined by the models of FWO, KAS and master plot method. TGA results revealed different reaction sections from pyrolysis to char gasification under CO2. The pyrolysis behavior was similar under CO2 and Ar and had a similar energy required value about 590 kJ/kg from 250 °C to 420 °C. CO, CH4, and H2 were the primary gases obtained from thermal decomposition, and the amounts of which in CO2 atmosphere were higher than those obtained in Ar. The average activation energy for pyrolysis under CO2 was 184.72 kJ/mol.

Open-access reader

About this research paper

What this paper is about

The gasification behavior of pine wood sawdust was investigated in CO2 with different heating rates of 5, 10, 15, and 20 °C/min from room temperature to 1400 °C by thermogravimetric analysis (TGA) and mass spectrometry (MS). It was also examined under Ar to compare the differences observed under CO2 at heating rate of 10 °C/min. Kinetics of pine wood sawdust thermal decomposition was determined by the models of FWO, KAS and master plot method. TGA results revealed different reaction sections from pyrolysis to char gasification under CO2. The pyrolysis behavior was similar under CO2 and Ar and had a similar energy required value about 590 kJ/kg from 250 °C to 420 °C. CO, CH4, and H2 were the primary gases obtained from thermal decomposition, and the amounts of which in CO2 atmosphere were higher than those obtained in Ar. The average activation energy for pyrolysis under CO2 was 184.72 kJ/mol.

Why it matters

OpenAlex reports 17 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The gasification behavior of pine wood sawdust was investigated in CO2 with different heating rates of 5, 10, 15, and 20 °C/min from room temperature to 1400 °C by thermogravimetric analysis (TGA) and mass spectrometry (MS). It was also examined under Ar to compare the differences observed under CO2 at heating rate of 10 °C/min. Kinetics of pine wood sawdust thermal decomposition was determined by the models of FWO, KAS and master plot method. TGA results revealed different reaction sections from pyrolysis to char gasification under CO2. The pyrolysis behavior was similar under CO2 and Ar and had a similar energy required value about 590 kJ/kg from 250 °C to 420 °C. CO, CH4, and H2 were the primary gases obtained from thermal decomposition, and the amounts of which in CO2 atmosphere were higher than those obtained in Ar. The average activation energy for pyrolysis under CO2 was 184.72 kJ/mol.

Key concepts: Thermogravimetric analysis, Sawdust, Pyrolysis, Char, Activation energy, Thermal decomposition, Decomposition, Materials science

Related papers

Back to paper searchBrowse research topicsOriginal source
Thermogravimetric and Kinetic Analysis of High-Temperature Thermal Conversion of Pine Wood Sawdust under CO2/Ar — Research Paper | ScholarLens