1998•Dépôt Institutionnel de l'Université M'Hamed Bougara de Boumerdes (M'Hamed University Bougara de Boumerdes)Requires access

Influence of surface roughness on the deuterium inventoryof ASDEX-UPGRADE divertor tiles

Diane Hildebrandt, Mohamed Akbi, Burkhard Jüttner, Wolfgang Schneider

Open publisher page 0 citations

Abstract

The gas inventory of divertor target tiles used in ASDEX-UPGRADE has been analyzed by thermodesorption spectrometry (TDS°. desorbed gaseous molecules have been measured by heating up complete and cut divertor tiles. the largest samplrs '80X80mm2)could be heated up to temperatures of 1500 K and smaller ones to even higher temperatures.in addition, surface analysis techniques as auger electron spectroscopy (AES),secondary ion mass spectrometry(SIMS), nuclear reaction analysis (NRA), electron microscopy and optical surface profiling have been applied for investigating erosion and deposition phenomena. the original plasma facing surface of the tiles were graphite (EK98) and plasma sprayed tungsten, respectively. the graphite tiles were used from 1991-1995 for about 1900 discharges and the tungsten tiles in 1996 for about 800 discharges...

About this research paper

What this paper is about

The gas inventory of divertor target tiles used in ASDEX-UPGRADE has been analyzed by thermodesorption spectrometry (TDS°. desorbed gaseous molecules have been measured by heating up complete and cut divertor tiles. the largest samplrs '80X80mm2)could be heated up to temperatures of 1500 K and smaller ones to even higher temperatures.in addition, surface analysis techniques as auger electron spectroscopy (AES),secondary ion mass spectrometry(SIMS), nuclear reaction analysis (NRA), electron microscopy and optical surface profiling have been applied for investigating erosion and deposition phenomena. the original plasma facing surface of the tiles were graphite (EK98) and plasma sprayed tungsten, respectively. the graphite tiles were used from 1991-1995 for about 1900 discharges and the tungsten tiles in 1996 for about 800 discharges...

Why it matters

A significance statement is not available in the OpenAlex record.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The gas inventory of divertor target tiles used in ASDEX-UPGRADE has been analyzed by thermodesorption spectrometry (TDS°. desorbed gaseous molecules have been measured by heating up complete and cut divertor tiles. the largest samplrs '80X80mm2)could be heated up to temperatures of 1500 K and smaller ones to even higher temperatures.in addition, surface analysis techniques as auger electron spectroscopy (AES),secondary ion mass spectrometry(SIMS), nuclear reaction analysis (NRA), electron microscopy and optical surface profiling have been applied for investigating erosion and deposition phenomena. the original plasma facing surface of the tiles were graphite (EK98) and plasma sprayed tungsten, respectively. the graphite tiles were used from 1991-1995 for about 1900 discharges and the tungsten tiles in 1996 for about 800 discharges...

Key concepts: Divertor, ASDEX Upgrade, Deuterium, Surface roughness, Materials science, Tokamak, Nuclear engineering, Nuclear physics

Related papers

Back to paper searchBrowse research topicsOriginal source
Influence of surface roughness on the deuterium inventoryof ASDEX-UPGRADE divertor tiles — Research Paper | ScholarLens