2021•The American Journal of Sports MedicineRequires access

Intratendinous Strain Variations of the Supraspinatus Tendon Depending on Repair Technique: A Biomechanical Analysis Regarding the Cause of Medial Cuff Failure

Michael Hackl, Julia Alexandra Nacov, Sandra Kammerlohr, Manfred Staat, Eduard Buess, Tim Leschinger, Lars Peter Müller, Kilian Wegmann

Open publisher page 7 citations

Abstract

Background: Double-row (DR) and transosseous-equivalent (TOE) techniques for rotator cuff repair offer more stability and promote better tendon healing compared with single-row (SR) repairs and are preferred by many surgeons. However, they can lead to more disastrous retear patterns with failure at the medial anchor row or the musculotendinous junction. The biomechanics of medial cuff failure have not been thoroughly investigated thus far. Purpose: To investigate the intratendinous strain distribution within the supraspinatus tendon depending on repair technique. Study Design: Controlled laboratory study. Methods: Twelve fresh-frozen cadaveric shoulders were used. The intratendinous strain within the supraspinatus tendon was analyzed in 2 regions—(1) at the footprint at the greater tuberosity and (2) medial to the footprint up to the musculotendinous junction—using a high-resolution 3-dimensional camera system. Testing was performed at submaximal loads of 40 N, 60 N, and 80 N for intact tendons, after SR repair, after DR repair, and after TOE repair. Results: The tendon strain of the SR group differed significantly in both regions from that of the intact tendons and the TOE group at 40 N ( P≤ .043) and from the intact tendons, the DR group, and the TOE group at 60 N and 80 N ( P≤ .048). SR repairs showed more tendon elongation at the footprint and less elongation medial to the footprint. DR and TOE repairs did not provide significant differences in tendon strain when compared with the intact tendons. However, the increase in tendon strain medial to the footprint from 40 N to 80 N was significantly more pronounced in the DR and TOE group ( P≤ .029). Conclusion: While DR and TOE repair techniques more closely reproduced the strains of the supraspinatus tendon than did SR repair in a cadaveric model, they showed a significantly increased tendon strain at the musculotendinous junction with higher loads in comparison with the intact tendon. Clinical Relevance: DR and TOE rotator cuff reconstructions lead to a more anatomic tendon repair. However, their use has to be carefully evaluated whenever tendon quality is diminished, as they lead to a more drastic increase in tendon strain medial to the footprint, putting these repairs at risk of medial cuff failure.

About this research paper

What this paper is about

Background: Double-row (DR) and transosseous-equivalent (TOE) techniques for rotator cuff repair offer more stability and promote better tendon healing compared with single-row (SR) repairs and are preferred by many surgeons. However, they can lead to more disastrous retear patterns with failure at the medial anchor row or the musculotendinous junction. The biomechanics of medial cuff failure have not been thoroughly investigated thus far. Purpose: To investigate the intratendinous strain distribution within the supraspinatus tendon depending on repair technique. Study Design: Controlled laboratory study. Methods: Twelve fresh-frozen cadaveric shoulders were used. The intratendinous strain within the supraspinatus tendon was analyzed in 2 regions—(1) at the footprint at the greater tuberosity and (2) medial to the footprint up to the musculotendinous junction—using a high-resolution 3-dimensional camera system. Testing was performed at submaximal loads of 40 N, 60 N, and 80 N for intact tendons, after SR repair, after DR repair, and after TOE repair. Results: The tendon strain of the SR group differed significantly in both regions from that of the intact tendons and the TOE group at 40 N ( P≤ .043) and from the intact tendons, the DR group, and the TOE group at 60 N and 80 N ( P≤ .048). SR repairs showed more tendon elongation at the footprint and less elongation medial to the footprint. DR and TOE repairs did not provide significant differences in tendon strain when compared with the intact tendons. However, the increase in tendon strain medial to the footprint from 40 N to 80 N was significantly more pronounced in the DR and TOE group ( P≤ .029). Conclusion: While DR and TOE repair techniques more closely reproduced the strains of the supraspinatus tendon than did SR repair in a cadaveric model, they showed a significantly increased tendon strain at the musculotendinous junction with higher loads in comparison with the intact tendon. Clinical Relevance: DR and TOE rotator cuff reconstructions lead to a more anatomic tendon repair. However, their use has to be carefully evaluated whenever tendon quality is diminished, as they lead to a more drastic increase in tendon strain medial to the footprint, putting these repairs at risk of medial cuff failure.

Why it matters

OpenAlex reports 7 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Background: Double-row (DR) and transosseous-equivalent (TOE) techniques for rotator cuff repair offer more stability and promote better tendon healing compared with single-row (SR) repairs and are preferred by many surgeons. However, they can lead to more disastrous retear patterns with failure at the medial anchor row or the musculotendinous junction. The biomechanics of medial cuff failure have not been thoroughly investigated thus far. Purpose: To investigate the intratendinous strain distribution within the supraspinatus tendon depending on repair technique. Study Design: Controlled laboratory study. Methods: Twelve fresh-frozen cadaveric shoulders were used. The intratendinous strain within the supraspinatus tendon was analyzed in 2 regions—(1) at the footprint at the greater tuberosity and (2) medial to the footprint up to the musculotendinous junction—using a high-resolution 3-dimensional camera system. Testing was performed at submaximal loads of 40 N, 60 N, and 80 N for intact tendons, after SR repair, after DR repair, and after TOE repair. Results: The tendon strain of the SR group differed significantly in both regions from that of the intact tendons and the TOE group at 40 N ( P≤ .043) and from the intact tendons, the DR group, and the TOE group at 60 N and 80 N ( P≤ .048). SR repairs showed more tendon elongation at the footprint and less elongation medial to the footprint. DR and TOE repairs did not provide significant differences in tendon strain when compared with the intact tendons. However, the increase in tendon strain medial to the footprint from 40 N to 80 N was significantly more pronounced in the DR and TOE group ( P≤ .029). Conclusion: While DR and TOE repair techniques more closely reproduced the strains of the supraspinatus tendon than did SR repair in a cadaveric model, they showed a significantly increased tendon strain at the musculotendinous junction with higher loads in comparison with the intact tendon. Clinical Relevance: DR and TOE rotator cuff reconstructions lead to a more anatomic tendon repair. However, their use has to be carefully evaluated whenever tendon quality is diminished, as they lead to a more drastic increase in tendon strain medial to the footprint, putting these repairs at risk of medial cuff failure.

Key concepts: Cadaveric spasm, Rotator cuff, Tendon, Medicine, Biomechanics, Shoulders, Rotator cuff injury, Strain (injury)

Related papers

Back to paper searchBrowse research topicsOriginal source
Intratendinous Strain Variations of the Supraspinatus Tendon Depending on Repair Technique: A Biomechanical Analysis Regarding the Cause of Medial Cuff Failure — Research Paper | ScholarLens