2011Acta Metallurgica SinicaRequires access

CORROSION BEHAVIOR OF Mg-Zn-Y-Zr ALLOYS IN NaCl SOLUTION

Jincheng Wang

Open publisher page 0 citations

Abstract

In recent years,Mg-Zn-Y-Zr alloys have attracted significant interest due to the high strength at room and elevated temperature.Current researches mainly focus on the microstructures and mechanical properties of Mg-Zn-Y-Zr alloys,however,the corrosion behaviors of Mg-Zn-Y-Zr alloys have been seldom studied.In the present paper,the mass loss corrosion and electrochemical corrosion behavior of three Mg-Zn-Y-Zr alloys with Zn contents of 4.3%(mass fraction),6%and 8.6% in 5%(mass fraction) NaCl solution were studied,respectively.The morphology,microstructure and phase composition of these alloys after different immersion time were observed.The results showed that the type of second phase and the content of Zn in these alloys significantly affect their corrosion resistance performance and the Mg-Zn-Y-Zr alloy with 4.3%Zn exhibited better corrosion resistance. With the increase of Zn content,the W phase with stronger effect of galvanic corrosion formed at grain boundaries and the content of Zn inα-Mg matrix also increased,which resulted in the worse corrosion performance.Experimental results also showed that the corrosion process of Mg-4.3Zn-0.7Y-0.6Zr alloy can be divided into three stages:galvanic corrosion,Zr-rich zone-Zr-poor zone corrosion and pitting corrosion.

About this research paper

What this paper is about

In recent years,Mg-Zn-Y-Zr alloys have attracted significant interest due to the high strength at room and elevated temperature.Current researches mainly focus on the microstructures and mechanical properties of Mg-Zn-Y-Zr alloys,however,the corrosion behaviors of Mg-Zn-Y-Zr alloys have been seldom studied.In the present paper,the mass loss corrosion and electrochemical corrosion behavior of three Mg-Zn-Y-Zr alloys with Zn contents of 4.3%(mass fraction),6%and 8.6% in 5%(mass fraction) NaCl solution were studied,respectively.The morphology,microstructure and phase composition of these alloys after different immersion time were observed.The results showed that the type of second phase and the content of Zn in these alloys significantly affect their corrosion resistance performance and the Mg-Zn-Y-Zr alloy with 4.3%Zn exhibited better corrosion resistance. With the increase of Zn content,the W phase with stronger effect of galvanic corrosion formed at grain boundaries and the content of Zn inα-Mg matrix also increased,which resulted in the worse corrosion performance.Experimental results also showed that the corrosion process of Mg-4.3Zn-0.7Y-0.6Zr alloy can be divided into three stages:galvanic corrosion,Zr-rich zone-Zr-poor zone corrosion and pitting corrosion.

Why it matters

A significance statement is not available in the OpenAlex record.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

In recent years,Mg-Zn-Y-Zr alloys have attracted significant interest due to the high strength at room and elevated temperature.Current researches mainly focus on the microstructures and mechanical properties of Mg-Zn-Y-Zr alloys,however,the corrosion behaviors of Mg-Zn-Y-Zr alloys have been seldom studied.In the present paper,the mass loss corrosion and electrochemical corrosion behavior of three Mg-Zn-Y-Zr alloys with Zn contents of 4.3%(mass fraction),6%and 8.6% in 5%(mass fraction) NaCl solution were studied,respectively.The morphology,microstructure and phase composition of these alloys after different immersion time were observed.The results showed that the type of second phase and the content of Zn in these alloys significantly affect their corrosion resistance performance and the Mg-Zn-Y-Zr alloy with 4.3%Zn exhibited better corrosion resistance. With the increase of Zn content,the W phase with stronger effect of galvanic corrosion formed at grain boundaries and the content of Zn inα-Mg matrix also increased,which resulted in the worse corrosion performance.Experimental results also showed that the corrosion process of Mg-4.3Zn-0.7Y-0.6Zr alloy can be divided into three stages:galvanic corrosion,Zr-rich zone-Zr-poor zone corrosion and pitting corrosion.

Key concepts: Corrosion, Materials science, Alloy, Microstructure, Metallurgy, Galvanic cell, Galvanic corrosion, Grain boundary

Related papers

Back to paper searchBrowse research topicsOriginal source
CORROSION BEHAVIOR OF Mg-Zn-Y-Zr ALLOYS IN NaCl SOLUTION — Research Paper | ScholarLens