2020•International Journal of Energy ResearchOpen access

Burn‐up calculation of the neutronic and safety parameters of thorium‐uranium mixed oxide fuel cycle in a Westinghouse small modular reactor

Edwin Humphrey Uguru, Siti Fairus Abdul Sani, Mayeen Uddin Khandaker, Mohamad Hairie Rabir, Julia Bt. Abdul Karim, Daniel Ugadu Onah, David Andrew Bradley

Open full text 19 citations

Abstract

Thorium fuel is presently a globally known future nuclear fuel alternative, having good neutronic, physical and chemical properties in addition to its spent nuclear fuel characteristic proliferation resistance. This research focused on the neutronic and safety parameters of thorium-uranium mixed oxide fuel cycle, utilising three fissile enrichment zones, a departure from the conventional single enrichment. The aim was to determine the range of three fissile zones adequate for thorium-uranium fuel cycle; investigating the performance efficiency of the fuel neutronic and inherent safety parameters in response to temperature differentials, which determines the viability of the fuel and core composition. Use was made of the MCNPX 2.7 code integrated with the CINDER90 fuel depletion code for steady-state and burn-up calculations. The keff, moderator temperature coefficient (MTC) and fuel temperature coefficient (FTC) of reactivity are affected by the range of fissile enrichment and fuel temperature which decreased with their respective increases. The MTC for all the moderator temperatures was within 0 to −40 pcm/K design value for UO2 fuel. Similarly, the FTC was within −3.5 to −1 pcm/K design value for all the fuel temperatures except after 2000 days, where a positive reactivity feedback was introduced. At ~86 MWd/kgHM single discharge burn-up, the result shows that ~90% of the initial fissile load was utilised for energy production at the normal reactor operating temperature (600 K) with a slight reduction at higher fuel temperature. The total fissile inventory ratio (FIR), 233U/kg-232Th and 239Pu/kg-238U inventory ratios were significantly large and increased with burn-up. It is remarkable that the FIR and the 233U/kg-232Th inventory ratio did not reach conversion equilibrium until exit burn-up. The large percentage fuel utilisation supports the advantage of fissile enrichment zoning in a thermal nuclear reactor core, making the chosen novel three fissile enrichment zones for thorium-uranium fuel cycle reliable.

Open-access reader

About this research paper

What this paper is about

Thorium fuel is presently a globally known future nuclear fuel alternative, having good neutronic, physical and chemical properties in addition to its spent nuclear fuel characteristic proliferation resistance. This research focused on the neutronic and safety parameters of thorium-uranium mixed oxide fuel cycle, utilising three fissile enrichment zones, a departure from the conventional single enrichment. The aim was to determine the range of three fissile zones adequate for thorium-uranium fuel cycle; investigating the performance efficiency of the fuel neutronic and inherent safety parameters in response to temperature differentials, which determines the viability of the fuel and core composition. Use was made of the MCNPX 2.7 code integrated with the CINDER90 fuel depletion code for steady-state and burn-up calculations. The keff, moderator temperature coefficient (MTC) and fuel temperature coefficient (FTC) of reactivity are affected by the range of fissile enrichment and fuel temperature which decreased with their respective increases. The MTC for all the moderator temperatures was within 0 to −40 pcm/K design value for UO2 fuel. Similarly, the FTC was within −3.5 to −1 pcm/K design value for all the fuel temperatures except after 2000 days, where a positive reactivity feedback was introduced. At ~86 MWd/kgHM single discharge burn-up, the result shows that ~90% of the initial fissile load was utilised for energy production at the normal reactor operating temperature (600 K) with a slight reduction at higher fuel temperature. The total fissile inventory ratio (FIR), 233U/kg-232Th and 239Pu/kg-238U inventory ratios were significantly large and increased with burn-up. It is remarkable that the FIR and the 233U/kg-232Th inventory ratio did not reach conversion equilibrium until exit burn-up. The large percentage fuel utilisation supports the advantage of fissile enrichment zoning in a thermal nuclear reactor core, making the chosen novel three fissile enrichment zones for thorium-uranium fuel cycle reliable.

Why it matters

OpenAlex reports 19 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Thorium fuel is presently a globally known future nuclear fuel alternative, having good neutronic, physical and chemical properties in addition to its spent nuclear fuel characteristic proliferation resistance. This research focused on the neutronic and safety parameters of thorium-uranium mixed oxide fuel cycle, utilising three fissile enrichment zones, a departure from the conventional single enrichment. The aim was to determine the range of three fissile zones adequate for thorium-uranium fuel cycle; investigating the performance efficiency of the fuel neutronic and inherent safety parameters in response to temperature differentials, which determines the viability of the fuel and core composition. Use was made of the MCNPX 2.7 code integrated with the CINDER90 fuel depletion code for steady-state and burn-up calculations. The keff, moderator temperature coefficient (MTC) and fuel temperature coefficient (FTC) of reactivity are affected by the range of fissile enrichment and fuel temperature which decreased with their respective increases. The MTC for all the moderator temperatures was within 0 to −40 pcm/K design value for UO2 fuel. Similarly, the FTC was within −3.5 to −1 pcm/K design value for all the fuel temperatures except after 2000 days, where a positive reactivity feedback was introduced. At ~86 MWd/kgHM single discharge burn-up, the result shows that ~90% of the initial fissile load was utilised for energy production at the normal reactor operating temperature (600 K) with a slight reduction at higher fuel temperature. The total fissile inventory ratio (FIR), 233U/kg-232Th and 239Pu/kg-238U inventory ratios were significantly large and increased with burn-up. It is remarkable that the FIR and the 233U/kg-232Th inventory ratio did not reach conversion equilibrium until exit burn-up. The large percentage fuel utilisation supports the advantage of fissile enrichment zoning in a thermal nuclear reactor core, making the chosen novel three fissile enrichment zones for thorium-uranium fuel cycle reliable.

Key concepts: Fissile material, Nuclear engineering, MOX fuel, Thorium fuel cycle, Enriched uranium, Spent nuclear fuel, Uranium, Environmental science

Related papers

Back to paper searchBrowse research topicsOriginal source
Burn‐up calculation of the neutronic and safety parameters of thorium‐uranium mixed oxide fuel cycle in a Westinghouse small modular reactor — Research Paper | ScholarLens