2020Journal of Chemical & Engineering DataRequires access

Surface Tension of Binary and Ternary Systems Containing Monoethanolamine (MEA), Water and Alcohols (Methanol, Ethanol, and Isopropanol) at 303.15 K

Mousarreza Abroodi, Ahmad Bagheri, Bibi Marzieh Razavizadeh

Open publisher page 16 citations

Abstract

Solutions containing alkanolamines or amines are broadly used for the removal of acidic compounds such as hydrogen sulfide (H 2 S) and carbon dioxide (CO 2 ) from natural gas flows. In this study, the surface tension of three binary mixtures containing monoethanolamine (MEA) and alcohol (methanol, ethanol, or isopropanol) and three ternary systems containing MEA, water, and alcohol (methanol, ethanol, or isopropanol) were determined in the whole composition range at 303.15 K and ambient pressure by means of the Du Noüy ring method. From these data, the composition dependence of the surface tension (σ) and surface tension deviation (Δσ) of binary mixtures was correlated using the FLW equation (proposed by Fu et al.) and the MS equation (proposed by Myers and Scott), respectively. Then, the surface tension data of three ternary mixtures were correlated with a polynomial based on the Scatchard model. Also, the surface tension data of three ternary mixtures were predicted based on the FLW model. The results show a good agreement between the predicted and measured values, as well as the applicability of the FLW model in these ternary mixtures. Finally, the isoline curves of surface tension and surface tension deviation versus mole fraction of components for the ternary mixtures are plotted and discussed.

About this research paper

What this paper is about

Solutions containing alkanolamines or amines are broadly used for the removal of acidic compounds such as hydrogen sulfide (H 2 S) and carbon dioxide (CO 2 ) from natural gas flows. In this study, the surface tension of three binary mixtures containing monoethanolamine (MEA) and alcohol (methanol, ethanol, or isopropanol) and three ternary systems containing MEA, water, and alcohol (methanol, ethanol, or isopropanol) were determined in the whole composition range at 303.15 K and ambient pressure by means of the Du Noüy ring method. From these data, the composition dependence of the surface tension (σ) and surface tension deviation (Δσ) of binary mixtures was correlated using the FLW equation (proposed by Fu et al.) and the MS equation (proposed by Myers and Scott), respectively. Then, the surface tension data of three ternary mixtures were correlated with a polynomial based on the Scatchard model. Also, the surface tension data of three ternary mixtures were predicted based on the FLW model. The results show a good agreement between the predicted and measured values, as well as the applicability of the FLW model in these ternary mixtures. Finally, the isoline curves of surface tension and surface tension deviation versus mole fraction of components for the ternary mixtures are plotted and discussed.

Why it matters

OpenAlex reports 16 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Solutions containing alkanolamines or amines are broadly used for the removal of acidic compounds such as hydrogen sulfide (H 2 S) and carbon dioxide (CO 2 ) from natural gas flows. In this study, the surface tension of three binary mixtures containing monoethanolamine (MEA) and alcohol (methanol, ethanol, or isopropanol) and three ternary systems containing MEA, water, and alcohol (methanol, ethanol, or isopropanol) were determined in the whole composition range at 303.15 K and ambient pressure by means of the Du Noüy ring method. From these data, the composition dependence of the surface tension (σ) and surface tension deviation (Δσ) of binary mixtures was correlated using the FLW equation (proposed by Fu et al.) and the MS equation (proposed by Myers and Scott), respectively. Then, the surface tension data of three ternary mixtures were correlated with a polynomial based on the Scatchard model. Also, the surface tension data of three ternary mixtures were predicted based on the FLW model. The results show a good agreement between the predicted and measured values, as well as the applicability of the FLW model in these ternary mixtures. Finally, the isoline curves of surface tension and surface tension deviation versus mole fraction of components for the ternary mixtures are plotted and discussed.

Key concepts: Ternary operation, Surface tension, Chemistry, Methanol, Mole fraction, Thermodynamics, Alcohol, Ternary numeral system

Related papers

Back to paper searchBrowse research topicsOriginal source
Surface Tension of Binary and Ternary Systems Containing Monoethanolamine (MEA), Water and Alcohols (Methanol, Ethanol, and Isopropanol) at 303.15 K — Research Paper | ScholarLens