Investigation of the Surface Properties and Wear Properties of AISI H11 Steel Treated by Auxiliary Heating Plasma Nitriding

This paper presents an auxiliary heating method to maintain a uniform specimen temperature and precisely control nitriding temperature during plasma nitriding. The surface properties and wear properties of AISI H11 steel treated by auxiliary heating plasma nitriding are investigated. Firstly, the specimens with different diffusion layers and different hardness levels are fabricated through changing the plasma nitriding temperature. Secondly, the surface properties of the plasma-nitrided H11 steel specimens are characterized by a scanning electron microscope (SEM), X-ray diffractometer, metallographic microscope and microhardness tester. The results show that the surface hardness of the plasma-nitrided specimen is almost twice as high as that of the untreated specimen. The thickness of diffusion layer increases with the increase of nitriding temperature. However, the surface hardness firstly increases and then decreases with the increase of the nitriding temperature. Finally, the wear properties of untreated and plasma-nitrided H11 steel specimens are investigated under different friction conditions. The results show that the plasma-nitriding method can significantly improve the wear resistance of AISI H11 steel. The friction coefficient fluctuations of the plasma-nitrided specimens are all lower than those of the untreated specimens. In addition, the wear rates of the plasma-nitrided specimens rise along with load, and reduce along with the sliding speed and friction temperature.