2019Chinese journal of plastic surgeryRequires access

Applied anatomy of human periobital region

Loubin Si, Mingzi Zhang, Xiao Kong, Liu Liu, Feng Qin, Wenchao Zhang, Fei Long, Yang Wang

Open publisher page 0 citations

Abstract

Objective To observe the anatomical layers and important vascular structures in the main periorbital regions of the human body, and to provide some anatomical basis for clinical periorbital fat injection. Methods During January 2018 to December 2018, 12 (24 sides) cadavers (6 males and 6 females, 47.5±11.7 years old) were selected. Their orbital tissues were dissected routinely and microdissected. The important blood vessels and tissues around the orbit were measured by electronic vernier caliper. The related matters needing attention in fat injection filling were analyzed according to references. Results The main structural areas around the orbit included eyelid, eyebrow and lacrimal groove deformities. The thickness of eyelid skin was (0.09±0.03) mm. The thickness of eyebrow skin was (3.45±0.38) mm. Vascular (diameter ranged from 1 mm to 3 mm) distribution was abundant in this area. The inner diameter of dorsal nasal artery, supraorbital artery and trochlear artery were (0.73±0.42) mm, (0.88±0.37) mm and (0.71±0.51) mm respectively. Facial artery, maxillary artery and superficial temporal artery with internal diameters of (2.96±0.88) mm, (1.92±0.33) mm and (1.35±0.15) mm, respectively. Conclusions The entrance of upper eyelid injection is usually in the eyebrow tail or middle eyebrow, and fat is injected into the deep surface of orbicularis oculi muscle. The injection range is limited to the medial 2/3 of upper eyelid, the medial 1/3 of lower eyebrow and the lateral part of eyebrow. It is suggested that single layer microinjection of fat (0.5 ml to 1.5 ml) could be used. Lower eyelid fat transplantation is mainly used to correct deformities at the eyelid-cheek junction. The aim is to reduce the V-shaped deformity at the eyelid-cheek junction by increasing the fullness. Injection can be made by blunt needle into the inner, outer and middle part of the deformity. Fat can be injected into SOOF layer or periosteum in the palpebral and cheek sulcus area. The injection volume is 0.5-1.0 ml. Key words: Periorbital region; Anatomy; Fat granule grafting

About this research paper

What this paper is about

Objective To observe the anatomical layers and important vascular structures in the main periorbital regions of the human body, and to provide some anatomical basis for clinical periorbital fat injection. Methods During January 2018 to December 2018, 12 (24 sides) cadavers (6 males and 6 females, 47.5±11.7 years old) were selected. Their orbital tissues were dissected routinely and microdissected. The important blood vessels and tissues around the orbit were measured by electronic vernier caliper. The related matters needing attention in fat injection filling were analyzed according to references. Results The main structural areas around the orbit included eyelid, eyebrow and lacrimal groove deformities. The thickness of eyelid skin was (0.09±0.03) mm. The thickness of eyebrow skin was (3.45±0.38) mm. Vascular (diameter ranged from 1 mm to 3 mm) distribution was abundant in this area. The inner diameter of dorsal nasal artery, supraorbital artery and trochlear artery were (0.73±0.42) mm, (0.88±0.37) mm and (0.71±0.51) mm respectively. Facial artery, maxillary artery and superficial temporal artery with internal diameters of (2.96±0.88) mm, (1.92±0.33) mm and (1.35±0.15) mm, respectively. Conclusions The entrance of upper eyelid injection is usually in the eyebrow tail or middle eyebrow, and fat is injected into the deep surface of orbicularis oculi muscle. The injection range is limited to the medial 2/3 of upper eyelid, the medial 1/3 of lower eyebrow and the lateral part of eyebrow. It is suggested that single layer microinjection of fat (0.5 ml to 1.5 ml) could be used. Lower eyelid fat transplantation is mainly used to correct deformities at the eyelid-cheek junction. The aim is to reduce the V-shaped deformity at the eyelid-cheek junction by increasing the fullness. Injection can be made by blunt needle into the inner, outer and middle part of the deformity. Fat can be injected into SOOF layer or periosteum in the palpebral and cheek sulcus area. The injection volume is 0.5-1.0 ml. Key words: Periorbital region; Anatomy; Fat granule grafting

Why it matters

A significance statement is not available in the OpenAlex record.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Objective To observe the anatomical layers and important vascular structures in the main periorbital regions of the human body, and to provide some anatomical basis for clinical periorbital fat injection. Methods During January 2018 to December 2018, 12 (24 sides) cadavers (6 males and 6 females, 47.5±11.7 years old) were selected. Their orbital tissues were dissected routinely and microdissected. The important blood vessels and tissues around the orbit were measured by electronic vernier caliper. The related matters needing attention in fat injection filling were analyzed according to references. Results The main structural areas around the orbit included eyelid, eyebrow and lacrimal groove deformities. The thickness of eyelid skin was (0.09±0.03) mm. The thickness of eyebrow skin was (3.45±0.38) mm. Vascular (diameter ranged from 1 mm to 3 mm) distribution was abundant in this area. The inner diameter of dorsal nasal artery, supraorbital artery and trochlear artery were (0.73±0.42) mm, (0.88±0.37) mm and (0.71±0.51) mm respectively. Facial artery, maxillary artery and superficial temporal artery with internal diameters of (2.96±0.88) mm, (1.92±0.33) mm and (1.35±0.15) mm, respectively. Conclusions The entrance of upper eyelid injection is usually in the eyebrow tail or middle eyebrow, and fat is injected into the deep surface of orbicularis oculi muscle. The injection range is limited to the medial 2/3 of upper eyelid, the medial 1/3 of lower eyebrow and the lateral part of eyebrow. It is suggested that single layer microinjection of fat (0.5 ml to 1.5 ml) could be used. Lower eyelid fat transplantation is mainly used to correct deformities at the eyelid-cheek junction. The aim is to reduce the V-shaped deformity at the eyelid-cheek junction by increasing the fullness. Injection can be made by blunt needle into the inner, outer and middle part of the deformity. Fat can be injected into SOOF layer or periosteum in the palpebral and cheek sulcus area. The injection volume is 0.5-1.0 ml. Key words: Periorbital region; Anatomy; Fat granule grafting

Key concepts: Eyebrow, Eyelid, Anatomy, Medicine, Orbicularis oculi muscle, Orbit (dynamics), Frontalis muscle, Cadaver

Related papers

Back to paper searchBrowse research topicsOriginal source
Applied anatomy of human periobital region — Research Paper | ScholarLens