Lignin: a valuable feedstock for biomass pellet
SMA Sujan, MA Kashem, A. N. M. Fakhruddin
Abstract
Open-access reader
SMA Sujan, MA Kashem, A. N. M. Fakhruddin
Abstract
Open-access reader
Pelletization and briquettization have been extensively used for mass and energy densification of biomass. As the demand for pellets increases, the biorefinery waste lignin can be used with the conventional raw materials for pellet preparation. Sugarcane bagasse (20-40 mesh) is treated with NaOH (8% & 16%) for bioethanol production and obtained lignin is used to prepare pellet along and with sugarcane bagasse (SB). SB, Lignin1 (8% NaOH treated SB), Lignin2 (16% NaOH treated SB) and various composition of SB and Lignin1 were used to produce pelletswith different applied pressures (5kN, 10kN, 15kN and 20kN). Pellet density and heating value were gradually increase with the applied pelletization pressure. Among the samples Lignin1 showed highest heating value at 20kN (3581.54 kcal/kg). Results revealed that 5kN is enough to produce pellet from different composition of SB and Lignin1 and the pellet composition of SB (40%) and Lignin1(60%) showed the highest heating value (3456.21 kcal/kg). Bangladesh J. Sci. Ind. Res.55(1), 83-88, 2020
OpenAlex reports 2 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Pelletization and briquettization have been extensively used for mass and energy densification of biomass. As the demand for pellets increases, the biorefinery waste lignin can be used with the conventional raw materials for pellet preparation. Sugarcane bagasse (20-40 mesh) is treated with NaOH (8% & 16%) for bioethanol production and obtained lignin is used to prepare pellet along and with sugarcane bagasse (SB). SB, Lignin1 (8% NaOH treated SB), Lignin2 (16% NaOH treated SB) and various composition of SB and Lignin1 were used to produce pelletswith different applied pressures (5kN, 10kN, 15kN and 20kN). Pellet density and heating value were gradually increase with the applied pelletization pressure. Among the samples Lignin1 showed highest heating value at 20kN (3581.54 kcal/kg). Results revealed that 5kN is enough to produce pellet from different composition of SB and Lignin1 and the pellet composition of SB (40%) and Lignin1(60%) showed the highest heating value (3456.21 kcal/kg). Bangladesh J. Sci. Ind. Res.55(1), 83-88, 2020
Key concepts: Pellet, Bagasse, Pelletizing, Pellets, Biorefinery, Lignin, Raw material, Biomass (ecology)