2020EnergiesOpen access

Impacts of Initial Sugar, Nitrogen and Calcium Carbonate on Butanol Fermentation from Sugarcane Molasses by Clostridium beijerinckii

Patthranit Narueworanon, Lakkana Laopaiboon, Niphaphat Phukoetphim, Pattana Laopaiboon

Open full text 30 citations

Abstract

Low-cost nitrogen sources, i.e., dried spent yeast (DSY), rice bran (RB), soybean meal (SM), urea and ammonium sulfate were used for batch butanol fermentation from sugarcane molasses by Clostridium beijerinckii TISTR 1461 under anaerobic conditions. Among these five low-cost nitrogen sources, DSY at 1.53 g/L (nitrogen content equal to that of 1 g/L of yeast extract) was found to be the most suitable. At an initial sugar level of 60 g/L, the maximum butanol concentration (PB), productivity (QB) and yield (YB/S) were 11.19 g/L, 0.23 g/L·h and 0.31 g/g, respectively. To improve the butanol production, the concentrations of initial sugar, DSY and calcium carbonate were varied using response surface methodology (RSM) based on Box–Behnken design. It was found that the optimal conditions for high butanol production were initial sugar, 50 g/L; DSY, 6 g/L and calcium carbonate, 6.6 g/L. Under these conditions, the highest experimental PB, QB and YB/S values were 11.38 g/L, 0.32 g/L·h and 0.40 g/g, respectively with 50% sugar consumption (SC). The PB with neither DSY nor CaCO3 was only 8.53 g/L. When an in situ gas stripping system was connected to the fermenter to remove butanol produced during the fermentation, the PB was increased to 15.33 g/L, whereas the YB/S (0.39 g/g) was not changed. However, the QB was decreased to 0.21 g/L·h with 75% SC.

Open-access reader

About this research paper

What this paper is about

Low-cost nitrogen sources, i.e., dried spent yeast (DSY), rice bran (RB), soybean meal (SM), urea and ammonium sulfate were used for batch butanol fermentation from sugarcane molasses by Clostridium beijerinckii TISTR 1461 under anaerobic conditions. Among these five low-cost nitrogen sources, DSY at 1.53 g/L (nitrogen content equal to that of 1 g/L of yeast extract) was found to be the most suitable. At an initial sugar level of 60 g/L, the maximum butanol concentration (PB), productivity (QB) and yield (YB/S) were 11.19 g/L, 0.23 g/L·h and 0.31 g/g, respectively. To improve the butanol production, the concentrations of initial sugar, DSY and calcium carbonate were varied using response surface methodology (RSM) based on Box–Behnken design. It was found that the optimal conditions for high butanol production were initial sugar, 50 g/L; DSY, 6 g/L and calcium carbonate, 6.6 g/L. Under these conditions, the highest experimental PB, QB and YB/S values were 11.38 g/L, 0.32 g/L·h and 0.40 g/g, respectively with 50% sugar consumption (SC). The PB with neither DSY nor CaCO3 was only 8.53 g/L. When an in situ gas stripping system was connected to the fermenter to remove butanol produced during the fermentation, the PB was increased to 15.33 g/L, whereas the YB/S (0.39 g/g) was not changed. However, the QB was decreased to 0.21 g/L·h with 75% SC.

Why it matters

OpenAlex reports 30 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Low-cost nitrogen sources, i.e., dried spent yeast (DSY), rice bran (RB), soybean meal (SM), urea and ammonium sulfate were used for batch butanol fermentation from sugarcane molasses by Clostridium beijerinckii TISTR 1461 under anaerobic conditions. Among these five low-cost nitrogen sources, DSY at 1.53 g/L (nitrogen content equal to that of 1 g/L of yeast extract) was found to be the most suitable. At an initial sugar level of 60 g/L, the maximum butanol concentration (PB), productivity (QB) and yield (YB/S) were 11.19 g/L, 0.23 g/L·h and 0.31 g/g, respectively. To improve the butanol production, the concentrations of initial sugar, DSY and calcium carbonate were varied using response surface methodology (RSM) based on Box–Behnken design. It was found that the optimal conditions for high butanol production were initial sugar, 50 g/L; DSY, 6 g/L and calcium carbonate, 6.6 g/L. Under these conditions, the highest experimental PB, QB and YB/S values were 11.38 g/L, 0.32 g/L·h and 0.40 g/g, respectively with 50% sugar consumption (SC). The PB with neither DSY nor CaCO3 was only 8.53 g/L. When an in situ gas stripping system was connected to the fermenter to remove butanol produced during the fermentation, the PB was increased to 15.33 g/L, whereas the YB/S (0.39 g/g) was not changed. However, the QB was decreased to 0.21 g/L·h with 75% SC.

Key concepts: Chemistry, Fermentation, Food science, Ammonium sulfate, Sugar, Butanol, Calcium carbonate, Response surface methodology

Related papers

Back to paper searchBrowse research topicsOriginal source
Impacts of Initial Sugar, Nitrogen and Calcium Carbonate on Butanol Fermentation from Sugarcane Molasses by Clostridium beijerinckii — Research Paper | ScholarLens