1960•Nuclear Science and EngineeringRequires access

MEASUREMENTS OF PARAMETERS LEADING TO p$sub 2$$sub 8$, f, AND /epsislon/ IN LIGHT WATER MODERATED 4.48% AND 2.73% ENRICHED LATTICES

Victor E. Grob, E. Santandrea, H. Ritz

Open publisher page 0 citations

Abstract

As part of the Yankee and the Relgian Reactor-3 Critical Experiments program, measurements were made of the parameters leading to p, f, and epsilon in a light-water moderated heterogeneous reactor with slightly enriched UO/sub 2/ fuel rods clad in stainless steel. Measurements were made using 4.48 and 2.73% enriched fuel with lattice pitches of 0.470 and 0.435 in. The individual UO/sub 2/ sintered pellets, in the fuel rods, had a diameter of 0.300 in. and a length of 0.600 in. The 4.48 and 2.73% fuel rods conthined 90 and 80 pellets, respectively. The stainless steel cladding was 0.305 in. ID and 0.347 in. OD for the 4.48% enriched fuel, and 0.306 in. ID and 0.338 in. OD in the case of 2.73% enrichment. The measurements were performed using a higher fuel enrichment than used previously at Rettis and elsewhere for similar experiments, thus uncovering a large unexplored rarge of enrichments (auth)

About this research paper

What this paper is about

As part of the Yankee and the Relgian Reactor-3 Critical Experiments program, measurements were made of the parameters leading to p, f, and epsilon in a light-water moderated heterogeneous reactor with slightly enriched UO/sub 2/ fuel rods clad in stainless steel. Measurements were made using 4.48 and 2.73% enriched fuel with lattice pitches of 0.470 and 0.435 in. The individual UO/sub 2/ sintered pellets, in the fuel rods, had a diameter of 0.300 in. and a length of 0.600 in. The 4.48 and 2.73% fuel rods conthined 90 and 80 pellets, respectively. The stainless steel cladding was 0.305 in. ID and 0.347 in. OD for the 4.48% enriched fuel, and 0.306 in. ID and 0.338 in. OD in the case of 2.73% enrichment. The measurements were performed using a higher fuel enrichment than used previously at Rettis and elsewhere for similar experiments, thus uncovering a large unexplored rarge of enrichments (auth)

Why it matters

A significance statement is not available in the OpenAlex record.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

As part of the Yankee and the Relgian Reactor-3 Critical Experiments program, measurements were made of the parameters leading to p, f, and epsilon in a light-water moderated heterogeneous reactor with slightly enriched UO/sub 2/ fuel rods clad in stainless steel. Measurements were made using 4.48 and 2.73% enriched fuel with lattice pitches of 0.470 and 0.435 in. The individual UO/sub 2/ sintered pellets, in the fuel rods, had a diameter of 0.300 in. and a length of 0.600 in. The 4.48 and 2.73% fuel rods conthined 90 and 80 pellets, respectively. The stainless steel cladding was 0.305 in. ID and 0.347 in. OD for the 4.48% enriched fuel, and 0.306 in. ID and 0.338 in. OD in the case of 2.73% enrichment. The measurements were performed using a higher fuel enrichment than used previously at Rettis and elsewhere for similar experiments, thus uncovering a large unexplored rarge of enrichments (auth)

Key concepts: Pellets, Rod, Materials science, Cladding (metalworking), Nuclear fuel, Pellet, Uranium dioxide, Light-water reactor

Related papers

Back to paper searchBrowse research topicsOriginal source
MEASUREMENTS OF PARAMETERS LEADING TO p$sub 2$sub 8$, f, AND /epsislon/ IN LIGHT WATER MODERATED 4.48% AND 2.73% ENRICHED LATTICES — Research Paper | ScholarLens