Comparative Study on Dynamic Response of Deck Pavement of Two Kinds of Box Girder Bridges under Moving Loads

The objective of this study is to analyse the difference of dynamic response of the deck pavement between a box girder bridge with corrugated steel webs and a concrete web box girder bridge. In this study, a simply supported beam with a span of 34 m is taken as the research object. According to the principle of equal shear stress of the box girder section, the three‐dimensional finite element model of the superstructure of two kinds of box girder bridges is established by the finite element software ABAQUS. The DLOAD and UTRACLOAD subroutines are called to impose a movement load on the bridge deck. The dynamic response of the bridge deck pavement under different vehicle speeds (36 km/h, 72 km/h, and 108 km/h) and different load types (single wheel rectangular uniform load and double wheel rectangular uniform load) is calculated. The variation trends of vertical displacement, longitudinal shear stress, and transverse stress of two bridges are compared. The results show that, under the same conditions, the dynamic response of the box girder bridge with corrugated steel webs is greater than that of the equivalent concrete web box girder bridge. The box girder bridge with corrugated steel webs has lightweight, good seismic performance and bending resistance, and more obvious advantages in deflection control. The equivalent concrete web box girder bridge has good shear and torsional properties. The response of two kinds of deck pavement systems of the box girder bridge under dynamic loads is more obvious than that under static loads. This study would provide some theoretical reference for the dynamic response of the deck paving system of box girder bridges.