2017ElectrophoresisRequires access

Production of \textgreek{b}-Lactoglobulin hydrolysates by monolith based immobilized trypsin reactors

Yuhong Mao, Urh Černigoj, Viktor Zalokar, Aleš Štrancar, Ulrich Kulozik

Open publisher page 0 citations

Abstract

Tryptic hydrolysis of β-Lactoglobulin (β-Lg) is attracting more and more attention due to the reduced allergenicity and the functionality of resulting hydrolysates. To produce hydrolysates in an economically viable way, immobilized trypsin reactors (IMTRs), based on polymethacrylate monolith with pore size 2.1 μm (N1) and 6 μm (N2), were developed and used in a flow-through system. IMTRs were characterized in terms of permeability and enzymatic activity during extensive usage. N1 showed twice the activity compared with N2, correlating well with its almost two times higher amount of immobilized trypsin. N2 showed high stability over 18 cycles, as well as over more than 30 weeks during storage. The efficiency of IMTRs on hydrolyzing β-Lg was compared with free trypsin, and the resulting hydrolysates were analyzed by MALDI-TOF/MS. The final hydrolysis degree by N1 reached 9.68% (86.58% cleavage sites) within 4 h, while only around 6% (53.67% cleavage sites) by 1.5 mg of free trypsin. Peptides analysis showed the different preference between immobilized trypsin and free trypsin. Under the experimental conditions used in this study, the potential cleavage site Lys(135) -Phe(136) was resistant against the immobilized trypsin in N1. Tryptic hydrolysis of β-Lactoglobulin (β-Lg) is attracting more and more attention due to the reduced allergenicity and the functionality of resulting hydrolysates. To produce hydrolysates in an economically viable way, immobilized trypsin reactors (IMTRs), based on polymethacrylate monolith with pore size 2.1 μm (N1) and 6 μm (N2), were developed and used in a flow-through system. IMTRs were characterized in terms of permeability and enzymatic activity during extensive usage. N1 showed twice the activity compared with N2, correlating well with its almost two times higher amount of immobilized trypsin. N2 showed high stability over 18 cycles, as well as over more than 30 weeks during storage. The efficiency of IMTRs on hydrolyzing β-Lg was compared with free trypsin, and the resulting hydrolysates were analyzed by MALDI-TOF/MS. The final hydrolysis degree by N1 reached 9.68% (86.58% cleavage sites) within 4 h, while only around 6% (53.67% cleavage sites) by 1.5 mg of free trypsin. Peptides analysis showed the different preference between immobilized trypsin and free trypsin. Under the experimental conditions used in this study, the potential cleavage site Lys135 -Phe136 was resistant against the immobilized trypsin in N1. // Tryptic hydrolysis of β-Lactoglobulin (β-Lg) is attracting more and more attention due to the reduced allergenicity and the functionality of resulting hydrolysates. To produce hydrolysates in an economically viable way, immobilized trypsin reactors (IMTRs), based on polymethacrylate monolith with pore size 2.1 μm (N1) and 6 μm (N2), were developed and used in a flow-through system. IMTRs were characterized in terms of permeability and enzymatic activity during extensive usage. N1 showed twice the activity compared with N2, correlating well with its almost two times higher amount of immobilized trypsin. N2 showed high stability over 18 cycles, as well as over more than 30 weeks during storage. The efficiency of IMTRs on hydrolyzing β-Lg was compared with free trypsin, and the resulting hydrolysates were analyzed by MALDI-TOF/MS. The final hydrolysis degree by N1 reached 9.68% (86.58% cleavage sites) within 4 h, while only around 6% (53.67% cleavage sites) by 1.5 mg of free trypsin. Peptides analysis showed the different preference between immobilized trypsin and free trypsin. Under the experimental conditions used in this study, the potential cleavage site Lys135 -Phe136 was resistant against the immobilized trypsin in N1.

About this research paper

What this paper is about

Tryptic hydrolysis of β-Lactoglobulin (β-Lg) is attracting more and more attention due to the reduced allergenicity and the functionality of resulting hydrolysates. To produce hydrolysates in an economically viable way, immobilized trypsin reactors (IMTRs), based on polymethacrylate monolith with pore size 2.1 μm (N1) and 6 μm (N2), were developed and used in a flow-through system. IMTRs were characterized in terms of permeability and enzymatic activity during extensive usage. N1 showed twice the activity compared with N2, correlating well with its almost two times higher amount of immobilized trypsin. N2 showed high stability over 18 cycles, as well as over more than 30 weeks during storage. The efficiency of IMTRs on hydrolyzing β-Lg was compared with free trypsin, and the resulting hydrolysates were analyzed by MALDI-TOF/MS. The final hydrolysis degree by N1 reached 9.68% (86.58% cleavage sites) within 4 h, while only around 6% (53.67% cleavage sites) by 1.5 mg of free trypsin. Peptides analysis showed the different preference between immobilized trypsin and free trypsin. Under the experimental conditions used in this study, the potential cleavage site Lys(135) -Phe(136) was resistant against the immobilized trypsin in N1. Tryptic hydrolysis of β-Lactoglobulin (β-Lg) is attracting more and more attention due to the reduced allergenicity and the functionality of resulting hydrolysates. To produce hydrolysates in an economically viable way, immobilized trypsin reactors (IMTRs), based on polymethacrylate monolith with pore size 2.1 μm (N1) and 6 μm (N2), were developed and used in a flow-through system. IMTRs were characterized in terms of permeability and enzymatic activity during extensive usage. N1 showed twice the activity compared with N2, correlating well with its almost two times higher amount of immobilized trypsin. N2 showed high stability over 18 cycles, as well as over more than 30 weeks during storage. The efficiency of IMTRs on hydrolyzing β-Lg was compared with free trypsin, and the resulting hydrolysates were analyzed by MALDI-TOF/MS. The final hydrolysis degree by N1 reached 9.68% (86.58% cleavage sites) within 4 h, while only around 6% (53.67% cleavage sites) by 1.5 mg of free trypsin. Peptides analysis showed the different preference between immobilized trypsin and free trypsin. Under the experimental conditions used in this study, the potential cleavage site Lys135 -Phe136 was resistant against the immobilized trypsin in N1. // Tryptic hydrolysis of β-Lactoglobulin (β-Lg) is attracting more and more attention due to the reduced allergenicity and the functionality of resulting hydrolysates. To produce hydrolysates in an economically viable way, immobilized trypsin reactors (IMTRs), based on polymethacrylate monolith with pore size 2.1 μm (N1) and 6 μm (N2), were developed and used in a flow-through system. IMTRs were characterized in terms of permeability and enzymatic activity during extensive usage. N1 showed twice the activity compared with N2, correlating well with its almost two times higher amount of immobilized trypsin. N2 showed high stability over 18 cycles, as well as over more than 30 weeks during storage. The efficiency of IMTRs on hydrolyzing β-Lg was compared with free trypsin, and the resulting hydrolysates were analyzed by MALDI-TOF/MS. The final hydrolysis degree by N1 reached 9.68% (86.58% cleavage sites) within 4 h, while only around 6% (53.67% cleavage sites) by 1.5 mg of free trypsin. Peptides analysis showed the different preference between immobilized trypsin and free trypsin. Under the experimental conditions used in this study, the potential cleavage site Lys135 -Phe136 was resistant against the immobilized trypsin in N1.

Why it matters

A significance statement is not available in the OpenAlex record.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Tryptic hydrolysis of β-Lactoglobulin (β-Lg) is attracting more and more attention due to the reduced allergenicity and the functionality of resulting hydrolysates. To produce hydrolysates in an economically viable way, immobilized trypsin reactors (IMTRs), based on polymethacrylate monolith with pore size 2.1 μm (N1) and 6 μm (N2), were developed and used in a flow-through system. IMTRs were characterized in terms of permeability and enzymatic activity during extensive usage. N1 showed twice the activity compared with N2, correlating well with its almost two times higher amount of immobilized trypsin. N2 showed high stability over 18 cycles, as well as over more than 30 weeks during storage. The efficiency of IMTRs on hydrolyzing β-Lg was compared with free trypsin, and the resulting hydrolysates were analyzed by MALDI-TOF/MS. The final hydrolysis degree by N1 reached 9.68% (86.58% cleavage sites) within 4 h, while only around 6% (53.67% cleavage sites) by 1.5 mg of free trypsin. Peptides analysis showed the different preference between immobilized trypsin and free trypsin. Under the experimental conditions used in this study, the potential cleavage site Lys(135) -Phe(136) was resistant against the immobilized trypsin in N1. Tryptic hydrolysis of β-Lactoglobulin (β-Lg) is attracting more and more attention due to the reduced allergenicity and the functionality of resulting hydrolysates. To produce hydrolysates in an economically viable way, immobilized trypsin reactors (IMTRs), based on polymethacrylate monolith with pore size 2.1 μm (N1) and 6 μm (N2), were developed and used in a flow-through system. IMTRs were characterized in terms of permeability and enzymatic activity during extensive usage. N1 showed twice the activity compared with N2, correlating well with its almost two times higher amount of immobilized trypsin. N2 showed high stability over 18 cycles, as well as over more than 30 weeks during storage. The efficiency of IMTRs on hydrolyzing β-Lg was compared with free trypsin, and the resulting hydrolysates were analyzed by MALDI-TOF/MS. The final hydrolysis degree by N1 reached 9.68% (86.58% cleavage sites) within 4 h, while only around 6% (53.67% cleavage sites) by 1.5 mg of free trypsin. Peptides analysis showed the different preference between immobilized trypsin and free trypsin. Under the experimental conditions used in this study, the potential cleavage site Lys135 -Phe136 was resistant against the immobilized trypsin in N1. // Tryptic hydrolysis of β-Lactoglobulin (β-Lg) is attracting more and more attention due to the reduced allergenicity and the functionality of resulting hydrolysates. To produce hydrolysates in an economically viable way, immobilized trypsin reactors (IMTRs), based on polymethacrylate monolith with pore size 2.1 μm (N1) and 6 μm (N2), were developed and used in a flow-through system. IMTRs were characterized in terms of permeability and enzymatic activity during extensive usage. N1 showed twice the activity compared with N2, correlating well with its almost two times higher amount of immobilized trypsin. N2 showed high stability over 18 cycles, as well as over more than 30 weeks during storage. The efficiency of IMTRs on hydrolyzing β-Lg was compared with free trypsin, and the resulting hydrolysates were analyzed by MALDI-TOF/MS. The final hydrolysis degree by N1 reached 9.68% (86.58% cleavage sites) within 4 h, while only around 6% (53.67% cleavage sites) by 1.5 mg of free trypsin. Peptides analysis showed the different preference between immobilized trypsin and free trypsin. Under the experimental conditions used in this study, the potential cleavage site Lys135 -Phe136 was resistant against the immobilized trypsin in N1.

Key concepts: Trypsin, Hydrolysate, Monolith, Chemistry, Hydrolysis, Chromatography, Immobilized enzyme, Biochemistry

Related papers

Back to paper searchBrowse research topicsOriginal source
Production of \textgreek{b}-Lactoglobulin hydrolysates by monolith based immobilized trypsin reactors — Research Paper | ScholarLens