Estimating the acoustic power of sources in semi-reverberant enclosures using generalized energy density

Sound power measurements of acoustic sources are typically performed in anechoic or reverberation chambers using acoustic pressure according to international standards. The anechoic chamber creates a free-field environment where the sound power is estimated from the squared pressure integrated over some enveloping surface. The reverberation chamber produces diffuse-field conditions, where sound power is proportional to the spatially averaged squared pressure. Since most acoustic sources exist in rooms that are neither anechoic nor entirely reverberant, it is desirable to estimate the sound power within these non-ideal, semi-reverberant spaces. In such environments, the direct and reverberant energies each contribute to the total measured field. If the kinetic and potential components of acoustic energy density are weighted appropriately, the spatial variation of the field can be significantly reduced compared to squared pressure. This generalized energy density allows an adaptation of the sound power formulation by Hopkins and Stryker to be used to make an efficient and accurate in situ sound power estimate of a noise source in a non-ideal acoustical environment. Since generalized energy density optimizes the spatial uniformity of the field, fewer measurement positions are needed compared to traditional standards. The experimental results and practical limitations of this method will be discussed.