2019•Fundamental and applied agricultureOpen access

Herbicidal weed control in drill sown spring wheat under Bangladesh condition

Sharif Ahmed, Md. Jahangir Alam, Tahir Hussain Awan, A. K. M. Mominul Islam

Open full text 7 citations

Abstract

Weeds are considered as one of the major factors responsible for current low wheat yield in Bangladesh. Although chemical weed control is well established in many wheat growing countries, in Bangladesh, the herbicides are typically not used by farmers to manage weeds in wheat. Hence, to evaluate the efficacy of pre- and post-emergence herbicides in mechanized drilled sown wheat, a two-year field study was conducted in southwest Bangladesh. The study evaluated the performance of four pre-emergence herbicides (oxadiargyl 80g, pendimethalin 850 g, pyrazosulfuron 15 g, and mefenacet + bensulfuran methyl 550 g a.i. ha-1) applied at 2 days after sowing (DAS) and four post-emergence herbicides (2,4-D 1400 g, ethoxysulfuron18 g, penoxsulam22.5 g, and fenoxaprop 56 g a.i. ha-1) applied at 20 DAS, on weed control efficacy. A season long weed-free and a season long weedy plots were also maintained to compare the results. The weed control option using a single pre- or post-emergence herbicide was not adequate to control weed effectively when weed infestation was relatively higher. The best yield provided by pre-emergence (pendimethalin and oxadiargyl) and post-emergence (2,4-D and ethoxysulfuron) herbicide treatments were respectively 13-15% and 12-17% lower than the yield (4.1-4.2 t ha-1) of weed-free treatment. Post-emergence herbicides fenoxaprop was the best in controlling weeds; however, due to phytotoxic effects on wheat plants, the plots applied with fenoxaprop produced very low yield (2.6-2.8 t ha-1). Similarly, even after good weed control by the post-emergence application of penoxsulam, phytotoxicity on wheat resulting in low yield. The study suggested that the best weed control option for wheat is to use a pre-emergence (pendimethalin or oxadiargyl) followed by (fb) a post-emergence (2,4-D or ethoxysulfuron) herbicides depending upon weed species which would benefit the farmers by providing high weed control efficacy at lower cost compared to manual weeding. [Fundam Appl Agric 2019; 4(2.000): 839-848]

About this research paper

What this paper is about

Weeds are considered as one of the major factors responsible for current low wheat yield in Bangladesh. Although chemical weed control is well established in many wheat growing countries, in Bangladesh, the herbicides are typically not used by farmers to manage weeds in wheat. Hence, to evaluate the efficacy of pre- and post-emergence herbicides in mechanized drilled sown wheat, a two-year field study was conducted in southwest Bangladesh. The study evaluated the performance of four pre-emergence herbicides (oxadiargyl 80g, pendimethalin 850 g, pyrazosulfuron 15 g, and mefenacet + bensulfuran methyl 550 g a.i. ha-1) applied at 2 days after sowing (DAS) and four post-emergence herbicides (2,4-D 1400 g, ethoxysulfuron18 g, penoxsulam22.5 g, and fenoxaprop 56 g a.i. ha-1) applied at 20 DAS, on weed control efficacy. A season long weed-free and a season long weedy plots were also maintained to compare the results. The weed control option using a single pre- or post-emergence herbicide was not adequate to control weed effectively when weed infestation was relatively higher. The best yield provided by pre-emergence (pendimethalin and oxadiargyl) and post-emergence (2,4-D and ethoxysulfuron) herbicide treatments were respectively 13-15% and 12-17% lower than the yield (4.1-4.2 t ha-1) of weed-free treatment. Post-emergence herbicides fenoxaprop was the best in controlling weeds; however, due to phytotoxic effects on wheat plants, the plots applied with fenoxaprop produced very low yield (2.6-2.8 t ha-1). Similarly, even after good weed control by the post-emergence application of penoxsulam, phytotoxicity on wheat resulting in low yield. The study suggested that the best weed control option for wheat is to use a pre-emergence (pendimethalin or oxadiargyl) followed by (fb) a post-emergence (2,4-D or ethoxysulfuron) herbicides depending upon weed species which would benefit the farmers by providing high weed control efficacy at lower cost compared to manual weeding. [Fundam Appl Agric 2019; 4(2.000): 839-848]

Why it matters

OpenAlex reports 7 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Weeds are considered as one of the major factors responsible for current low wheat yield in Bangladesh. Although chemical weed control is well established in many wheat growing countries, in Bangladesh, the herbicides are typically not used by farmers to manage weeds in wheat. Hence, to evaluate the efficacy of pre- and post-emergence herbicides in mechanized drilled sown wheat, a two-year field study was conducted in southwest Bangladesh. The study evaluated the performance of four pre-emergence herbicides (oxadiargyl 80g, pendimethalin 850 g, pyrazosulfuron 15 g, and mefenacet + bensulfuran methyl 550 g a.i. ha-1) applied at 2 days after sowing (DAS) and four post-emergence herbicides (2,4-D 1400 g, ethoxysulfuron18 g, penoxsulam22.5 g, and fenoxaprop 56 g a.i. ha-1) applied at 20 DAS, on weed control efficacy. A season long weed-free and a season long weedy plots were also maintained to compare the results. The weed control option using a single pre- or post-emergence herbicide was not adequate to control weed effectively when weed infestation was relatively higher. The best yield provided by pre-emergence (pendimethalin and oxadiargyl) and post-emergence (2,4-D and ethoxysulfuron) herbicide treatments were respectively 13-15% and 12-17% lower than the yield (4.1-4.2 t ha-1) of weed-free treatment. Post-emergence herbicides fenoxaprop was the best in controlling weeds; however, due to phytotoxic effects on wheat plants, the plots applied with fenoxaprop produced very low yield (2.6-2.8 t ha-1). Similarly, even after good weed control by the post-emergence application of penoxsulam, phytotoxicity on wheat resulting in low yield. The study suggested that the best weed control option for wheat is to use a pre-emergence (pendimethalin or oxadiargyl) followed by (fb) a post-emergence (2,4-D or ethoxysulfuron) herbicides depending upon weed species which would benefit the farmers by providing high weed control efficacy at lower cost compared to manual weeding. [Fundam Appl Agric 2019; 4(2.000): 839-848]

Key concepts: Agronomy, Weed control, Spring (device), Weed, Drill, Biology, Environmental science, Engineering

Related papers

Back to paper searchBrowse research topicsOriginal source
Herbicidal weed control in drill sown spring wheat under Bangladesh condition — Research Paper | ScholarLens