Measurement and Tuning of the RF Field for the CSNS DTL
Ahong Li, Qiang Chen, Mengxu Fan, Shinian Fu, Keyun Gong, Li, Bo, Hua Liu, Jun Peng, Peihua Qu, Yun Wang, Xiao Wu
Abstract
Ahong Li, Qiang Chen, Mengxu Fan, Shinian Fu, Keyun Gong, Li, Bo, Hua Liu, Jun Peng, Peihua Qu, Yun Wang, Xiao Wu
Abstract
The CSNS DTL accelerates negative hydrogen ions from 3MeV to 80MeV with resonant frequency of 324MHz and peak current of 15mA. The CSNS includes four DTL cavities with diameter of 56.6cm and each length of 9 meters. RF properties research and measurement have been done to make sure the design and manufacture validate for beam operation. A new automatic system has been developed for measuring field distribution. The secondary derivation method is used to calculate the amount of the tuners to tune axial field flatness. The tilt of TS curve is used to judge the gap between the post couplers and drift tubes to achieve stability. At last the tanks have good flatness and strong stabilization, the field deviation is 2% with the standard deviation of 0.96%, and the maximum TS parameter is 65%/MHz. After the low power RF tuning experiment, the four tans have been installed in the tunnel, and have gotten good results of high power test and beam acceleration experiment.
OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
The CSNS DTL accelerates negative hydrogen ions from 3MeV to 80MeV with resonant frequency of 324MHz and peak current of 15mA. The CSNS includes four DTL cavities with diameter of 56.6cm and each length of 9 meters. RF properties research and measurement have been done to make sure the design and manufacture validate for beam operation. A new automatic system has been developed for measuring field distribution. The secondary derivation method is used to calculate the amount of the tuners to tune axial field flatness. The tilt of TS curve is used to judge the gap between the post couplers and drift tubes to achieve stability. At last the tanks have good flatness and strong stabilization, the field deviation is 2% with the standard deviation of 0.96%, and the maximum TS parameter is 65%/MHz. After the low power RF tuning experiment, the four tans have been installed in the tunnel, and have gotten good results of high power test and beam acceleration experiment.
Key concepts: Field (mathematics), Computer science, Engineering, Mathematics, Pure mathematics