2018Materials ScienceOpen access

Investigation of Mortars and Plasters of a Byzantine Church in Southwest Anatolia with Emphasis on Possible Pozzolan Use

Evin Caner, Bilge Alp Güney

Open full text 2 citations

Abstract

Characterization of mortars and plasters used in historical structures is crucial before conservation interventions in order to propose proper repair materials and avoid any damage caused by material incompatibility. In the present study, mortars and plasters of a Byzantine Church in the ancient city of Stratonikeia dated back to 5th – 7th centuries were examined in terms of physical/physico-mechanical characteristics and raw materials used by various analytical techniques. Possible use of pozzolanic materials in mortar and plaster samples were investigated by pozzolanic activity tests performed on the aggregates (< 125 µm) and examining the reaction products formed after immersion of these aggregates in a saturated solution of Ca(OH)2. Investigated mortar and plaster samples were found to have relatively low bulk density and high effective porosity. Compressive strength values of mortar samples were found to be in the range of 3.92 – 4.47 MPa. Binder used in the mortar and plaster samples were assessed to be fat lime. Aggregates of the samples smaller than 125 µm were found to have good pozzolanicity. Formation of pozzolanic reaction products by the reaction of the finer aggregates with Ca(OH)2 were confirmed by the results of SEM-EDX and FTIR analyses.DOI: http://dx.doi.org/10.5755/j01.ms.24.3.18590

Open-access reader

About this research paper

What this paper is about

Characterization of mortars and plasters used in historical structures is crucial before conservation interventions in order to propose proper repair materials and avoid any damage caused by material incompatibility. In the present study, mortars and plasters of a Byzantine Church in the ancient city of Stratonikeia dated back to 5th – 7th centuries were examined in terms of physical/physico-mechanical characteristics and raw materials used by various analytical techniques. Possible use of pozzolanic materials in mortar and plaster samples were investigated by pozzolanic activity tests performed on the aggregates (< 125 µm) and examining the reaction products formed after immersion of these aggregates in a saturated solution of Ca(OH)2. Investigated mortar and plaster samples were found to have relatively low bulk density and high effective porosity. Compressive strength values of mortar samples were found to be in the range of 3.92 – 4.47 MPa. Binder used in the mortar and plaster samples were assessed to be fat lime. Aggregates of the samples smaller than 125 µm were found to have good pozzolanicity. Formation of pozzolanic reaction products by the reaction of the finer aggregates with Ca(OH)2 were confirmed by the results of SEM-EDX and FTIR analyses.DOI: http://dx.doi.org/10.5755/j01.ms.24.3.18590

Why it matters

OpenAlex reports 2 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Characterization of mortars and plasters used in historical structures is crucial before conservation interventions in order to propose proper repair materials and avoid any damage caused by material incompatibility. In the present study, mortars and plasters of a Byzantine Church in the ancient city of Stratonikeia dated back to 5th – 7th centuries were examined in terms of physical/physico-mechanical characteristics and raw materials used by various analytical techniques. Possible use of pozzolanic materials in mortar and plaster samples were investigated by pozzolanic activity tests performed on the aggregates (< 125 µm) and examining the reaction products formed after immersion of these aggregates in a saturated solution of Ca(OH)2. Investigated mortar and plaster samples were found to have relatively low bulk density and high effective porosity. Compressive strength values of mortar samples were found to be in the range of 3.92 – 4.47 MPa. Binder used in the mortar and plaster samples were assessed to be fat lime. Aggregates of the samples smaller than 125 µm were found to have good pozzolanicity. Formation of pozzolanic reaction products by the reaction of the finer aggregates with Ca(OH)2 were confirmed by the results of SEM-EDX and FTIR analyses.DOI: http://dx.doi.org/10.5755/j01.ms.24.3.18590

Key concepts: Mortar, Byzantine architecture, Pozzolan, Materials science, Solid mechanics, Structural material, Archaeology, Metallurgy

Related papers

Back to paper searchBrowse research topicsOriginal source
Investigation of Mortars and Plasters of a Byzantine Church in Southwest Anatolia with Emphasis on Possible Pozzolan Use — Research Paper | ScholarLens